Solar road stud NK-RS-T1

Solar Road Stud can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning to drivers in darkness and bad weathers.

Body material: Aluminum+PC

Solar panel Material： Mono crystalline silicon solar panel 2.5V/0.25W

Size: 124*43*29mm

LED color :

Life span: 3—5 years

Send Email Chat Now

Share with:

Introduction

Specification

Application

Inquiry

Product introduction :

Solar Road Stud also know as cat eyes,can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning to drivers in darkness and bad weathers. The solar system of solar road reflectors is conducive for reducing environmental impact and saving costs. With more than 15 years of factory experience, solar powered cats eyesproduced by our company have competitive led road markers price and offers more choice to global traffic road safety market and trustworthy partners all over the world.

Working Principle of Solar Road Stud Light:

During the day, solar panels absorb sunlight and convert solar energy into electrical energy, which is stored in energy storage devices (batteries or capacitors). At night, the electrical energy in the energy storage devices is automatically converted into light energy (controlled by photoelectric switches) and emitted by LEDs. Bright light outlines the road and induces the driver's sight. Solar road studs will starts automatically to flash when night falls or with the onset of inclement weather .The bright flashing LEDs are highly effective at getting the attention of drivers much earlier than conventional road studs.

Installation Method Of Raised Solar Road Stud:

Determine the installation location and distance, clean the road surface, and ensure that the solar road studs are installed on a flat road surface.
Clean the bottom of the solar road stud and apply the epoxy glue evenly to the back of the studs.
Press the side with the glue on the road, fix the position, wait for the glue to dry.
Check within 2 hours of installation to ensure that all studs are not installed incorrectly and are not bent or deformed due to compression.
Remove the installation isolation facility within 6-8 hours after the installation of the solar road studs.

The recommended spacing between each solar road studs are as follows:

Highways and Expressways
7 - 8 yards (5 - 6 meters)
Dangerous Entrances and Exits
4 - 5 yards (2 - 3 meters)
Access or Exit ways for Hospitals, Parking Lots, etc.
0.5 - 3 yards (0.5 - 2 meters)

The spacing between of each solar studs also according to your actual application requirements, the above values are for reference only.

Characteristic:

1. Easy installation, no maintenance
2. Saves power, no additional expenses, environmentally friendly, no pollution
3. Solar energy-based power source
4. Brightness sensitive auto-switch, automatically turns on at night and turns off at dawn

Specification :

Material	Aluminum+PC
Power supply	Mono crystalline solar panel
Power supply	2.5V/120MA for NI-MH;
Battery	NI-MH 1.2V/ 600mah(high temperature resistance);
Lens	PC
LED	Ultra bright diameter 5mm(6pcs)
LED color	Red,Yellow,Green,Blue,White
Working model	Blinking or constant(charged at daytime, working automatically at night)
Working hours	(1).Blinking:140hours for NI-MH battery; 130hours for lithium battery;
Working hours	(2).Constant:40hours for NI-MH battery; 35hours for lithium battery;
Visual distance	>800m
Water proof	IP68
Resistance	>20T
Life span	2years for NI-MH battery;
Life span	5years for Lithium battery;
Size	1244329mm (L4.88"W1.69"H1.14")
Packing	2pc/box;60pcs/ctn
Carton size	482721.5cm (18.90"10.63"8.46")
Weight	26kgs/ctn (57.32bs/ctn)
Certificate	CE;ROHS;IP68

Application:

NOKIN solar road stud NK-RS-D1 in Austria

NOKIN Solar Powered Road Stud in Saudi Arabia

The Advantage Of Solar Powered Cat Eyes On Road

Application of LED Solar Road Marker On Airport in Brazil

Send Your Inquiry

Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.