Solar road stud is a new type of active luminous warning product for road traffic facilities. Solar Studs uses LEDs and combines with reflectors to emit light. It is mainly set on the curbstone, on the separation of the fast and slow lanes, and is generally used in conjunction with the marking line.
Roadway lighting systems are now widely accepted as essential for controlling traffic flow in a wide number of applications. In practice, such systems operate well above the road surface and use a number of well known and widely accepted colours, with lights in particular orientations to make the message to a driver clear and univocal thereby improving the outturn of the road while enhancing safety aspects.
Our Solar Road Studs are reflective which provides effective night guidance even under the most adverse weather conditions thus giving protection to drivers & pedestrians and to ensure smooth flow of traffic. This road safety devices are made from high grade rigid ABS Plastic which enables the studs to bear severe impacts.
The Solar Road Studs Cast Aluminium Road Stud is ideal for high speed, heavy traffic highways as they are able to take high impact at speed. Solar Road Studs Cast Aluminium Road Studs are available in red or amber as well as a combination of these colours.
Strong pressure resistance ability and can bear capacity over 30 tons from the vehicle tires.
Long Reflective ability and reflects at a distance of 350m.
Excellent Anti-corrosion ability and can endure the corrosion of water, oil, grit and chemicals.
Good heat-resistant ability and can withstand temperatures up to 60°C.
Strong adhesion and is not easy to grind off because it fixed to the road by an anti-twist stem for added stability.
Solar Road studs play an essential role in the reinforcement of road line demarcation and are vital with assisting motorists to remain on the correct side of the road and not swaying into oncoming traffic. When a motorist goes over a road line with road studs there will be a change in motion as well as a warning sound (the motorist will feel as if they are going over small bumps and the noise will be similar to a ‘thunk’ when the wheel makes contact with the road stud).
Solar Road Stud also know as cat eyes,can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning to drivers in darkness and bad weathers. The solar system of solar powered marker lights is conducive for reducing environmental impact and saving costs. With more than 15 years of factory experience, led road reflectors produced by our company owns competitive price and offers more choice to global traffic road safety market and trustworthy partners all over the world.
The base of this solar road stud is made of cast aluminum, and the surface is made of plastic spraying technology.
The shell is made of reinforced PC material, which has excellent impact resistance and heat stability
Loading capacity more than 30 tons, can be used in the middle of road.
Solar Road Stud works with solar power and does not require any electrical connection. Used to mark road edges and centrelines. It is equipped with long lasting LEDs and runs for many years without maintenance. It is mounted on the road surface and flashes to warn the drivers. The LEDs are designed to be visible from a distance of about 1 km. It is more striking than normal reflectors in rainy and foggy weather. The battery in the Road stud is charged during the day, while in the dark air the LEDs start flashing.
Smart, safe and sustainable solar-powered road studs, proven to increase night-time road safety. Providing a view of the road layout ahead in the driver’s natural line of vision and well beyond the headlight beam of a vehicle. Even in poor conditions (rain, fog or surface spray) where traditional retro-reflective studs and road markings are less visible, SOLAR ROAD STUD studs continue to shine brightly, guiding you safely.SOLAR ROAD STUD road studs are more robust and durable than traditional road studs meaning they have a lower overall lifetime cost than a retro-reflective road stud and better longevity. Just a few hours of daylight will provide enough battery power to last days – more than enough to ensure the system operates all year round, whatever the weather.
Solar Road Stud is suitable for low and medium speed road warning lane
Depending on the actual road conditions, you can select a continuous producto, single or multiple products, combined to install them on the road pavement either on one or both sides.
At night, its signaling funtion provides drivers of motor vehicles with orientation instructions, as well as drivers of non-motorized vehicles and pedestrians. In this way, it greatly improves road safety at night.
solar road stud
Durable high temperature, strong brightness, long life-span LED lamp light, which has strong penetrating power . Road reflectors are mainly installed in the middle of road markings or yellow double lines to remind drivers to drive according to the lane to prevent reflection. It warns the driver when there is insufficient light ,mist ,fog or at night, reducing the accident rate. Its visible distance is more than 800 meters, which can effectively provide a safe route for the driver.
SOLAR ROAD STUD EXCELLENT DURABILITY AND WATERPROOFNESS: The reflector of the ground road lamp is made of high-quality cast aluminum, which is durable and durable. The waterproof and dustproof design of the road indicator prevents dust and water from entering for longer durability.
SOLAR ROAD STUD SUPERB ENERGY-SAVING AND ENERGY-SAVING TECHNOLOGY: Road diversion lights use solar power, green and low carbon, and respect for the environment Solar panels are fully charged in the sun and automatically recharge during the day. Long life and easy installation. Mono-crystalline solar panel with lithium battery for maximum storage
LED Road Stud Solar Powered also known as Road Reflector is designed to guide vehicles and pedestrians for directions.
Powered by Solar Energy, it is more environmentally friendly and with a light feeling function, it automatically lights up when it turns dark. Guided by this light, people will be safe on the way.
Our Road Stud is rated as IP68
That is fully dust-tight and protected from long term immersion up to a specified pressure, limited ingress protection.
This item signifies our commitment to provide each and every household or business in the Philippines. As a result, access to energy efficient and environmentally friendly lighting alternatives set at reasonably low and affordable prices.
As well as milled road studs, we’ve also worked on numerous projects with surface mounted reflective road studs, including IL300 and A6-1 road studs. We also frequently provide pedestrian metal studs, which are non-reflective studs used to delineate pedestrian areas such as paths and walkways.
Colloquially known as ‘cat’s eyes’, road studs are the small markers found on roads across the country. These can be reflective, non-reflective or even solar powered, but they all have one thing in common: they are used to make the boundaries of a road and its lanes more obvious, particularly in the dark.
At NOKIN, we’ve built up a broad portfolio of road stud projects across the public and private sectors. We provide a local installation service, and all of our operatives are fully trained in the installation of every type of road stud. We offer both supply-only and supply-and-fit road stud arrangements, depending on your requirements.
Solar panel powered solar road stud aluminum led reflective road mark Road stud also called solar road stud ,led solar road stud, can be used for road traffic warnings, withstand car, truck roller compaction, can also be used for lane dividers, work modes can be selected flashing and always bright, colors are red, yellow, white, blue, green and any more. Reduce Traffic Congestion, stay away from traffic accident, save more life!
Solar marker is a raised solar road stud (also know as “solar cat eye”).
Absorbing solar energy from the sun during the day and emitting light using highly visible LED illumination and retro-reflective lens creates a highly visible line of light directing drivers and increasing road safety.
All Solar Path’s Solar Road Studs utilize ultra-capacitor technology, prolonging product life and protecting the environment!
solar road stud is designed for uni-directional or bi-directional lane delineation and is installed at surface-level as opposed to conventional above surface pavement markers.
The prism design of the unit’s illumination surface ensures that the light projects at an elevated angle which is visible at long distances (3,300ft. / 1000m) as if it was installed above surface.
Combined with passive retro-reflectors the provides the ultimate solution for night time guidance and demarcation all year round.
The background of solar road studs is that the focus of highway construction is gradually shifting to mountainous areas and mountainous areas where economic development is relatively lagging. On highways in mountainous areas, the wind speed is more significantly affected by mountains and valleys. The humid and rainy climate, coupled with the lush forest environment, often produces fog in this section of the road. And highways usually span a long distance, especially many highways passing through rural and mountainous areas, which makes the situation of highways relatively complicated. The distribution of fog is often very uneven, and sometimes the line of sight is quite clear on a section of road. The other section was heavily foggy.
Road studs serve various purposes on the UK road network from assisting people who are visually impaired. Helping them when crossing the road, to keeping drivers on the correct side of the carriageway in poorly lit areas. There are two main types of road studs available, reflective and non-reflective.
Solar Road Stud Features
1. High-quality GB-ADC12 standard cast aluminum. Embedded design to make it more pressure resistant.
2. Lithium battery–longer lifespan. We adopt Taiwan Epistar brand-led chips with high lumen and long lifespan. Under the exposure of standard light intensity for 8 hours, it can work for 300 hours in flashing mode.
3. Waterproof IP68 and high temperature resistant.
4. Use in multiple scenarios. Solar road studs are widely used: in parks, docks, highways, home gardens, etc.
The road surface on which the solar road studs are installed should be clean, dry and free of dust or loose matter. Not recommended for ambient temperatures below 5°C. Solar road spikes must not be applied to wet surfaces. To activate the full performance of the adhesive, the road surface should be gently preheated to a temperature of 50°C (hand hot), care must be taken to ensure that the road surface does not overheat, as this can damage the surface. If the prevailing ambient temperature conditions are low, the adhesive pads attached to the studs should be heated above 10°C.
Established in 2001, NOKIN TRAFFIC manufactures traffic safety products and has become one of the most active and creative companies in the field. Our Highway Road Stud Light sells well in Mainland China, as well as in the markets of Asia, Europe, the Middle East, Africa, and other countries and regions.
Solar road studs in Intelligent Pedestrian System Using for sidewalks, warning drivers and pedestrians, to ensure the crosswalk traffic safety, Solar road studs Can be combined with traffic lights, indicating the state of road traffic, traffic lights to reduce the intersection of the dead, NOKIN solar road stud X5 Coordinating with thermal imaging detectors, geomagnetic sensor, installed in the crosswalk or accident-prone area, automatic work to increase road safety. Embedded design makes solar road stud X5 400KN compression, can be installed in the sidewalk zebra, road centerline.
Solar road studs oﬀer numerous beneﬁts, as mentioned in this article. Internally Illuminated solar road studs should be of a high quality, have a high compression resistance and wide temperature range, and should be correctly suited to their application, be it on the road edge, curves, intersections, pedestrian crossings . The road sector should aspire to apply automatic integration of safety measures, as is standard in aircraft safety. Hence, road studs should be incorporated into designs as an additional safety measure.
The number of X5 road warning lights required for an in roadway warning lights system depends on the number of lanes in the road. A typical two-lane road requires five lights embedded in the road on either side of the crosswalk – ten lights in total. Lights in the roadway are placed outward from the center of the crosswalk to alert oncoming motorists in any direction. Likewise, a typical four-lane road requires seven lights facing outwards in each direction, for a total of fourteen lights.
In-road warning lights (IRWLs) are embedded in the pavement to clearly outline a crosswalk and rapidly flash in unison to alert distracted drivers that pedestrians are actively crossing. In-Road Warning Light Systems are ideally suited for mid-block crosswalks, school zones, high volume crosswalks, and high speed roadways. Crosswalk lighting systems doubled rates of drivers yielding to pedestrians at crosswalks.
When led road studs and intelligent transportation systems are combined, they have different effects. Intelligent transportation systems are a combination of leading-edge information and communication technologies used in transportation and traffic management systems to improve the safety, efficiency, and sustainability of transportation networks, to reduce traffic congestion and to enhance drivers’ experiences. The possibilities are endless.
NOKIN LED solar road stud is well received in Philippine Market, especially in Metro Manila, Davao City with a mostly advantaged price over any other China supplier or Philippine supplier. LED Solar road stud is a protruding sign. It’s self-luminous, supplied by solar panel. Generally used for paving road, used at night or in the rain and fog weather, and sketched the outline of the road, to improve road safety.
In conclusion, I will want you to know that the efficaciousness of a solar road stud cannot be over emphasized. It is will be useful on German roads to help curb accidents that happen at nights. It has been tested and it has worked in other countries of the world as indicated earlier. If such is brought to use on German roads, it will help increase the life expectancy of Germany and save lots of lives from untimely death which may occur as a result of road accident. Road studs enhances visibility of up to a kilometer ahead -ten times further than headlights can reach reflectors, even in bad weather. They come in both raised and flush styles with a variety of colours. This technology is already in use in some parts of Europe.
Solar road stud road transport system in Germany
Germany has approximately 650,000 km of roads, of which 231,000 km are non-local roads. The road network is extensively used with nearly 2 trillion kilometers travelled by car in 2005, in comparison to just 70 billion km travelled by rail and 35 billion km travelled by plane. High-speed vehicular traffic has a long tradition in Germany given that the first freeway (Autobahn) in the world, the AVUS, and the world’s first automobile were developed and built in Germany. Germany possesses one of the most dense road systems of the world. German motorways have no blanket speed limit for light vehicles, and this has led to various degrees of road accidents and fatalities. Hence, there is a need to put up a system that can help reduce these accidents and fatalities, this is where installing a solar powered road stud comes to play.
Solar road studs are an improvement on traditional road studs invented in 1993. Early inventions were based on the principle of the cat’s eye. When light enters the cat’s eye, the light is reflected back to the source of the emission. Thus, road conditions and routes can be identified in the dark and at night through the reflection of road studs on the headlights of the car.
Road studs, also known as raised pavement markings, cat’s eyes or road turtles, are used for lane delineation, especially in dark and inclement weather conditions. They delineate roads in the center and at the edges, mark parking spaces in car parks, traffic islands, shopping mall entrances, gas stations and venues, and raised pavement markings ensure high visibility with cat eyes or mirrors. Some studs are epoxy mounted to the pavement, others are secured with single or double shanks. Solar road studs are like reflective road studs, but use solar energy to power recessed LED lights. They are made of metal or durable tempered glass and can hold up to about 40 tons
Welcome to our road studs page, where we offer premium solar road studs that are safer than driveway reflectors.
Suitable for a range of industrial applications, such as solar pole lights on animal grids to warn of impending traffic hazards. Ideal for outdoor mining operations, council and improved road lighting, farm driveway solar post lights, remote airstrip night lighting to solar warning beacons.
Our solar road profile studs and beacons are made of high quality and strong enough materials to withstand 20-30 tons of compression, available in flickering or constant light and in any color that suits your application.
NOKIN offers high-quality LED Solar Powered Road Studs, also known as Road Reflectors. These products are designed to guide vehicles and pedestrians for directions. The road reflectors we offer are powered by solar energy, making them more environmentally friendly. Because of its light feeling function, they automatically light up and help guide people on their way.
LED Road Stud Solar Powered also known as Road Reflector is designed to guide vehicles and pedestrians for directions. Powered by Solar Energy, it is more environmentally friendly and with a light feeling function, it automatically lights up when it turns dark. Guided by this light, people will be safe on the way. Our Road Stud is rated as IP68. That is fully dust-tight and protected from long term immersion up to a specified pressure, limited ingress protection.This item signifies our commitment to provide each and every household or business in the Philippines. As a result, access to energy efficient and environmentally friendly lighting alternatives set at reasonably low and affordable prices.
The innovative and flexible design of smart road studs provides drivers with an early sense of the road ahead, giving them more time to react accordingly. The revolutionary smart road studs are suitable for a wide range of applications from dynamic lane markings and tunnel delineation to pedestrian crossing systems and are effective in all lighting conditions, making them a smart choice for improving driver awareness and behavior on the road Road safety has had a clear impact.
In contrast, our solar road studs use a combination of reflective strips and built-in high-intensity LEDs powered by harnessing free solar energy, resulting in a solution that increases visibility of road layouts ahead by a factor of 10, thus up to 900m . This increases the time available to determine the road ahead, allowing you to adapt your behavior to the driving conditions ahead. Even in inclement weather conditions, other road markings become less visible, and ground spikes continue to glow to guide you safely.
NOKIN Solar Road Stud does not have the same dependency. They don’t rely on the vehicle’s headlight beams at all. Instead, they actively provide light output directly within the driver’s natural line of sight through high-brightness LEDs in the studs. These LED spikes are powered by solar energy captured from natural sunlight by built-in solar panels and stored in the spike’s internal battery. Thanks to this active light output, they provide up to 10 times better visibility of the road layout ahead compared to conventional reflective road markings, enabling driver visibility up to 900m.
The led solar road studs turn on and off automatically – at dusk, the units turn on, and at daylight, they turn off… The led solar road studs are designed to handle tremendous weight pressure and extreme heat and cold conditions. The led solar road studs are easily installed and do not require any maintenance or electrical installation. The units operate at a very low voltage and are sealed making them safe for the public and the installers.
After Smart Pedestrian Crosswalk System is activated, the daytime visible road stud light beads and day&night mode luminous traffic signs direct the driver’s perspective to warn the driver that there are or will be pedestrians passing the crosswalk, please slow down and give way.
The road stud light board directs pedestrian perspective and warns the pedestrian that you are or will pass the crosswalk, please be careful. Driver-pedestrian warning at the same time to effectively ensure the safety of pedestrian crossing.
Shenzhen NOKIN Traffic Facilities Co., Ltd. develops and manufactures solar road studs in the road safety industry for street marking tasks. Solar Pavement Levelled Marker are specially designed for marking of pedestrian crossings, roundabouts, traffic islands, etc. Our Solar Pavement Levelled Marker are made of active lighting LED light sources and can work completely autonomously within a few years.
The NOKIN Pedestrian Crosswalk Warning Light Systems can be widely recognized by the masses which is inseparable from our company’s serious attitude. We have always been based on safety, intelligence, and innovation, with “warning” as the core, and “letting traffic hazards be seen” as the guide, deeply researched and developed the intelligent pre-warning system, which aims to effectively transmit each warning signal, effectively solve traffic problems, and protect both drivers and pedestrians’ safety.
Smart Crosswalks System aims to prevent traffic accidents by effectively warning drivers at pedestrian crossings. When the button on it is pressed, the warning system activates and the LED warning light flashes to encourage drivers to be careful. In this way, pedestrians can safely cross the street. This special system runs entirely on solar energy.
The main objective of the Intelligent Pedestrian System is to increase traffic safety for pedestrians in busy areas. Some led road stud lights are installed next to pedestrian crossings, making them more visible to drivers and let drivers know that there are people crossing or who intend to cross them.
At NOKIN, we achieve this by enabling additional perception for the vehicles through road side sensors, for example by using our Smart Pedestrian Crosswalk to see behind corners and detect road users well in advance. The Smart Pedestrian Crosswalk supports V2X (infrastructure-to-vehicle) communication enabling automatic communication between all communication-ready traffic entities.
Intelligent pedestrian crosswalk system is a multifunctional C-ITS device, which improves traffic safety on unregulated pedestrian crosswalks. The design of the device is intended to comply with all requirements concerning roadside C-ITS applications. The main task of the Intelligent pedestrian crosswalk system is to improve the awareness of road users located nearby and to notify road users of the probable traffic hazard. The system is adaptive so it reacts accordingly to the situation. Hardware is meant to be modular and can be retrofitted on the existing infrastructure.
solar road stud lights are installed on the road, and remind the driver to guide the direction in rainy, foggy, and low visibility periods by means of constant light or flashing. Compared with reflective road studs, it has active light-emitting and flashing reminders. Compared with ordinary road marker lights, it has the functions of preventing dizziness and clear and orderly warning reminders.
Surface-mounted aluminum cat eye road is with spike looking like a foot, it will be better to fix on-road than traditional cats eye reflective road stud without a spike, what is more, it is with mono solar panel and battery, which can actively emit light at night to better mark the outline and direction of the road, so as to be better seen by the driver and improve the safety of night driving. More and more people purchase cat-eye solar road markers for different projects.
This solar-powered road stud adopts a double-sided luminous design, it is composed of reflective materials, die-cast aluminum shell, solar panels, LEDs, energy storage batteries, and control devices. It combines active luminescence and passive reflection to be road markers. The number of led chips is 4pcs/6pcs optional. It is the most mainstream solar road stud solution currently on the market, is used for deck, highway, crosswalk, lanes by engineering companies, wholesalers, and retailers.
Solar pavement markers, also called solar cat eyes, use the principle of solar lighting system to integrate a set of components including the LED light source, energy storage battery, and charging solar panel in the traditional reflective road stud. At night or under the condition of insufficient brightness, it can actively emit amber, white, green, red, or blue lights, and at the same time with high reflective film, accurately and safely outline the forward direction of the road, which greatly provides road driving security.
SOLAR-LED ROAD STUD USE IN SMART PEDESTRIAN CROSSING SYSTEM : Smart Pedestrian Crossing System, detect the pedestrian when crossing the road, Day-Night dual mode Fully Lit Sign and Embedded Road Stud quick flash to warning coming vehicles to reduce the driving speed to give ways to pedestrians, it has full-dimensional warning effect.
The flush type solar led road stud is produced by mould in one punch, with no need to assemble, which greatly improves its load capability. Solar battery, electronic component and LED indicators are sealed in solar road studs with a special technique, the road stud is strictly waterproof, which can be used on ponding roads in the long run. Upside of the solar road stud is designed with embossed parallel stiffeners which strengthen the stud and protect the solar panel from being crushed by the wheels.
Solar Road Stud has been designed and manufactured to withstand particular difficult environmental and traffic conditions. The high intensity ABS used is one of those offering maximum compression resistances to vehicular traffic and to spread the impact load over the pavement surface. Reflective lenses use PMMA imported from Japanese. Strong compression resistance, greater than 160KN. Strong reflective, good water-resistance and push-resistance The reflective solar road stud are particularly suitable for roads with heavy traffic.
Solar-powered road studs also called solar road markers or known as solar road reflectors, are a kind of traffic safety warning lights with amber, yellow, green, red, blue, white color options. They are generally installed along the road or motorway surface. It is used to indicate the direction of the road. Especially in rainy&foggy weather, or at bends, the road contour can be better marked to remind the driver to pay attention to the driving route ahead. Greatly reduce traffic accidents.
solar road stud can stand greater shock and can fend against corrosion in a long time. Compression resistance of 10 tons. Curve smooth of without sharp edges can better buffer tire’s compressor. The solar road stud water-proof level can achieve the industry standard IP68. It could be extremely effective in water-proofing. Little power consumption, long working time and easy installation is the main selling point. Solar road stud can use over 60hours after full charged. Normal life-cycle can last 3-5years. It is already widely used in different road situations, such as dim sunlight, rainy days and heavy trucks.
Solar road studs provide effective night guidance during night hours and in adverse weather conditions. The studs are easily visible and can be heard and felt due to the rumble when a vehicle crosses over them. Available in different aluminum and rigid plastic sizes for both centre division and to delineate edges, these studs are highly impact proof and known for reflectivity.
The road stud is used in roadway and roadside. We have plastic road stud, aluminum road stud, solar road stud, ceramics road stud, glass road stud, led road stud etc. Our road stud is durable with hi-vis reflective tape. Be anti-UV, non-fade, high visibility. Moisture & temperature resistant. Some road studs can bear heavy vehicles.
Die-cast aluminum solar road stud. It is including two types: full cast aluminum and cast aluminum shell. All-cast aluminum means that is made of metal and has a relatively high compressive strength. It is generally used at double yellow lines and is called all-aluminum road studs. Cast aluminum shell means it is cast aluminum and the inside is filled. The cost of such a road stud is lower than that of full cast aluminum, but at the same time, the compressive strength is not so high. It is generally called cast aluminum road stud or cast aluminum-filled road stud.
NOKIN solar road studs are blinking when night falls. These items are charged during the daytime when the sun shines on them, and they will be flashing/steady on very brightly all night. They are widely used on roads, highway, tunnel, parking pots, gardens, squares and other public places. road stud provide excellent visibility for longer distance, and also support wireless control system solution for applications like changeable lanes, crosswalks and many more various areas where need specific management.
This solar road stud is widely used in the Philippines, the United States, and other countries. Solar road studs not only feature safe property, but also a beautiful appearance. At night, it looks like a necklace to dress up a city and a road. NOKIN also have another type of solar road studs which are very hot sale in the Philippines, it is a solar road stud with 6 safety locks, and the dia is 143mm and 150mm two size, if you interested in this one, pls contact us directly to get more information.
This Internally Illuminated solar road stud has 4 sides emit light, making a stronger visual impact feeling, NOKIN the main product is Solar road stud, solar warning light, solar traffic signs, and reflective road safety product. Now we are developing intelligent traffic safety products. Such as synchronized flashing solar road studs, synchronized flashing solar warning lights, LED road studs to connect with traffic signal lights, solar traffic signs with signals,s and so on.
This solar reflective road stud designed for highway express roadside lane, solar batteries powered enable make the LED consistant working without replacement battery, which can be continuely work at least 15 days after one time fully charged under the strong sunshine.
Cast Aluminum Road Stud has been designed and manufactured to withstand particular difficult environmental and traffic conditions. The high intensity ABS used is one of those offering maximum compression resistances to vehicular traffic and to spread the impact load over the pavement surface. Reflective lenses use PMMA imported from Japanese. Strong compression resistance, greater than 160KN. Strong reflective, good water-resistance and push-resistanceThe reflective cast aluminum road stud are particularly suitable for roads with heavy traffic.
Shenzhen Nokin Traffic Facilities Co., Ltd. was established in 2001.Our company is located in Shenzhen City, Guangzhou Province, China. NOKIN specializes in the production and development of solar road studs and solar traffic signs in the field of traffic facilities. Our main products include solar road studs, reflective road studs, solar traffic signs, traffic warning lights, and all kinds of traffic safety and parking safety products.
Shenzhen Nokin Traffic Facilities Co., Ltd. was founded in 2001, It is an export-oriented high-tech enterprise that specialize in solar traffic product and traffic safety facilities R&D, production, and sale. NOKIN main products include: solar road stud lights, solar delineators, solar traffic signs, LED tunnel guide signs, solar traffic lights, ordinary road studs, reflective delineators, solar street lights etc. with over 100 varieties and more than 10 series products. We have been adhering the business philosophy of “quality is for survival, integrity is for development” since its establishment, Unremittingly supplying high-quality road stud lights and services.
Because the tiny glass beads in thermoplastic are not reflective in rain, they enhance the reflection of road markings on rainy nights.
In addition to road markings at night, guide traffic on highways or curves to provide a safer visual environment. Tiny glass beads in thermoplastics tend to fall off; therefore, the reflection of road markings is greatly reduced. Collision action alerts drivers when they change lanes
Solar road studs work through retroreflection. This is important in traffic, as reflectors reflect the vehicle’s light back to road users from all angles, guiding or warning them in various traffic situations.
Automatically starts to work when night falls or with the onset of inclement weather energy saving.No UV rays,environment friendly.
This aluminum alloy LED road stud is naturally charged by the sun.The battery might be out because of keeping in stock for a longtime,It’s not mal-funtion,Pls install it under the sunlight for charging when you use it.
The LED light come on automatically as soon as it starts getting dark every night.
They have been specifically designed with road safety in mind and can help to prevent serious accidents and emit rather than reflect light.-Solar LED road studs are also know as solar raised pavement makers,solar reflective lane markers and solar warning devices.
Application scenes:The light is ideal for illuminating paths,decks,docks,boats, driveways,stairways,pavements.
We also have many kinds of plastic road stud and other aluminium road stud,solor road stud,glass road stud and ceramic road stud.Road lighting is a crucial part of road design, and designers need to ensure the roadway is adequately lit to provide illumination of the road ahead and increased reaction time . Solar road studs oﬀer numerous beneﬁ ts, as mentioned in this article. Solar road studs should be of a high quality, have a high compression resistance and wide temperature range, and should be correctly suited to their application, be it on the road edge, curves, intersections, pedestrian crossings . The road sector should aspire to apply automatic integration of safety measures, as is standard in aircraft safety. Hence, road studs should be incorporated into designs as an additional safety measure. Installing and upgrading roads with the use of LED lighting and solar road studs or hardwired studs will make a vital contribution to the reduction in road accidents and the unacceptable burden they impose on society.
Solar road stud provides a sustainable solution with innovative solar power. The intelligent aluminum solar road stud can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning to drivers in darkness and bad weathers.
NOKIN road stud light provides excellent visibility for longer distances and also support wireless control system solutions for applications like changeable lanes, crosswalks, and many more various areas that need specific management. Factory wholesale good quality led aluminum solar road stud light, Embedded in the ground way, fit in the application in a crossing way and heavier duty way, also fit in the lane place.
Solar road stud Light: No need for wires, No need for electrics, No cost! Simple installation, Simple use! It ONLY needs the new, clean, SUN POWER to charge the battery inside and work AUTOMATICALLY! The road stud lights are designed for decoration and illumination. It charges automatically during the daytime and illuminates after dark. With die casting aluminum shell, reflection film, and PC material roof, this road stud light is Ip68 waterproof, anti UV, and anti-yellowing.
This is a solar based road stud guide amied at helping motorist navigate at night where there is no electrification and have to negotiate Sharp turns. This has a solar panel inbuit which charges a nickel cadmium 3 volt cell through out the day and switches on when the sun is down. This is a ip 68/product and can with stand load up to 30 tons.This is a very important device which can help prevent accident at night.This comes with a warranty of one year it comes in two variants that is blinking mode and steady mode.LED colour available are RED, BLUE, GREEN AND YELLOW.
If you are looking to buy waterproof solar road studs, these solar road studs are famous for having superb IP68 waterproof ratings. So, even if your current location is frequented by harsh weather conditions, these items can endure such scenarios. You won’t even have a hard time installing these solar road stud lights where needed. These are also durable enough to resist pressure up to twenty tons. With excellent lighting, they can help ward off various sorts of accidents. Their super sturdy built makes them usable in all types of outdoor conditions.
The solar road stud lights can help to reduce accidents at regional rail crossings, intersections and provide guidance and hazard warning to drivers in darkness and bad weathers. The road stud light could automatically charge during the day and flash at night automatically. With more than 20 years of factory experience, road stud light produced by our company owns competitive road stud light price and offers more choice to the global traffic road safety market and trustworthy partners all over the world.
Solar stud A6 Made from qualified material, solar road stud is reliable for long time use. The solar-powered design is energy-saving and environmentally friendly. High luminous intensity and Long lifespan. Solar studs automatically charge during daytime. Auto turns on at night and off at sunrise. Made of high-quality aluminum materials, this solar road stud is made for almost any situation. This solar road stud can be used on most roadways without the fear of being crushed or damaged.
NOKIN Trffic offers the widest range of solar road studs on the China market, aimed at ensuring road safety and signaling on roads, tunnels, highways, motorways, bike lanes, tramway signage, roundabouts, streets, shopping and leisure centers. In pedestrian crossings, streets, tunnels, and roads. with road traffic, it is recommended regardless of the technical characteristics of the solar road stud, to place them in alternation, avoiding being located directly in the passage of the vehicles.
Durable white solar road stud light A6-1 is a high-quality weather-resistant product suitable for residential and commercial applications. Strong shock-resistant Die-Cast Aluminium Shell can withstand heavyweight up to 30 tons, external impact and severe weather conditions. A maintenance-free automatic light control system allows operating the light in various scenarios including driveways, highways, car parking lots, traffic lanes and islands, decks, marinas, pathways, etc.
Solar road stud lights have multiple features, including durability, high visibility and low maintenance. Adie-cast aluminum housing can withstand the weight of a car (20 tons) and prevent corrosion and aging. LEDs as the light source are up to 7 times brighter than ordinary reflective road studs providing visibility 800 meters and more. Solar road studs are powered by solar energy and automatically lights up at night. These features make the lighting highly energy-efficient, environment-friendly, and easy to install and maintain.
Solar road stud also known as Road Reflector is designed to guide vehicles and pedestrians for directions.Powered by Solar Energy, it is more environmentally friendly and with a light feeling function, it automatically lights up when it turns dark. Guided by this light, people will be safe on the way.Our Road Stud is rated as IP68
That is fully dust-tight and protected from long term immersion up to a specified pressure, limited ingress protection. This item signifies our commitment to provide each and every household or business in the Philippines. As a result, access to energy efficient and environmentally friendly lighting alternatives set at reasonably low and affordable prices. For LED Strip Lights items, both indoor and outdoor, check out our LED Solar Street Lights and Street Lights product category.
Solar road stud light A1 ideal for walkways, steps, paving areas, car parks, roading and general access areas in and around your business premises, whenever extra luminance is required for safety. Sustainable and environmentally friendly option for self-lighting delineation 50 hours continuous from a full charge.
Solar Road Stud model NK-RS-A1 is suitable for low and medium-speed road warning lanes. Depending on the actual road conditions, you can select a continuous product, single or multiple solar road studs, combined to install them on the road pavement either on one or both sides. At night, its signaling function provides drivers of motor vehicles with orientation instructions, as well as drivers of non-motorized vehicles and pedestrians. In this way, solar road studs greatly improves road safety at night.
Are you looking to brighten your pouch, patio, deck, or other outdoor part of the home? Then you will certainly find the best solar deck lights very useful. There are several advantages to these devices. They are often lightweight, easy to install and energy efficient. As many people see the advantages and buy them, manufacturers make even more models. This flashing road stud light from NOKIN is very suitable for solar deck lights.
Established in the year 2001 in China. NOKIN believe in Safe Practices and offer road stud light & Safety Products for City Roads, Highways, Apartment/Office complexes, Small/Large Scale Industries and help them in choosing the best solution for their utmost Safety Requirements. NOKIN solar road stud NOKIN solar road studs have been widely applied in Southeast Asia, Europe and America, the Middle East, South Africa, Brazil, Argentina and other hundreds of countries and regions. And NOKIN has signed product agency agreements with South Africa, Spain, the United States, Thailand and other companies.
The solar road stud Q7 from NOKIN is a perfect choice for those looking for sturdy and durable lights that are quick and easy to install. Its LEDs are bright enough to suit your needs and light up your home. Overall, these solar road stud lights are a great choice for those looking for heavy-duty and quality dock lighting. Many users were satisfied with their purchase. The majority of them liked the product’s durable and sturdy design and also the fact that it was very easy to install.
Square solar road stud lights’ unique design also made them very easy to install- solar road stud lights are lightweight and wireless. Moreover, along with the screw sets and the user manual, its design also makes it easier to mount. If you don’t want to screw it, adhesives would provide the same effect. The NOKIN solar road stud lights also come with excellent customer service. It comes with a 1-year warranty and its customer support is always responsive to queries.
The NOKIN solar stud F1 is housed in a high-quality poly-carbonate casing that can withstand most weather conditions such as rain, snow, sleet, winds, hail, rust, etc. The IP68- rated PC shell cover is also both waterproof and heatproof due to the sealed battery compartment that makes it resistant to rust. This PC yellow solar stud with loading bearing 30 tons, and the two sides reflectors are ultrasonic welded and will never fall off.
Solar road stud lights provide clearly visible traffic guidance in all weather conditions. solar road stud lights start automatically to flash when night falls or with the onset of inclement weather . The bright flashing LEDs are highly effective at getting the attention of drivers much earlier than conventional road studs.
Solar Road Stud or Solar Road Marker is a protruding sign. It’s self-luminous, with energy supplied by solar panels and a durable Ni-MH battery. Solar road studs are generally used for paving roads, used at night or in the rain and fog weather, and sketched the outline of the road, to improve road safety.
The solar cell road studs are designed to replace existing ordinary reflective road studs, which work by reflecting light from vehicle headlights. Such existing systems limit the visible distance of the stud to only the distance of the vehicle’s headlights, resulting in limited visibility at night or in different weather conditions and causing accidents on multiple occasions.
Solar Road Studs We offer a range of premium quality solar road studs that provide the perfect solution for accent lighting or irregular power supply requirements. These are unique road safety devices that provide clearly visible traffic guidance in all weather conditions. Our solar studs are easy to install, robust and compact in size. This product contains blinking LEDs and is ideal for curbs, curves, intersections, driveways and porches. Our solar panels are specially designed to maximize the use of solar energy and convert it into electricity. We use high quality rechargeable batteries that are extremely durable, have built-in controllers, and have excellent automatic performance. These products are available at economical prices with high performance and long service life.
Product Description Solar road studs can be automatically turned on by absorbing the energy of sunlight when it is raining or cloudy, providing good guidance for drivers. Second, it is easy to install and make full use of natural energy. Product Features It can work for 8 to 12 hours every day after being charged in the sun, and it can work for 3 to 4 days even without solar energy. With its help, it has a visible range of 800m and a flash rate of 120 times per minute or always on.
Solar Road studs provide effective night guidance during night hours and in adverse weather conditions. The studs are easily visible and can be heard and felt due to the rumble when a vehicle crosses over them. Available in different aluminum and rigid plastic sizes for both centre division and to delineate edges, these studs are highly impact proof and known for reflectivity .
Solar Road Studs Description: These solar LED road studs are naturally charged by the sun. Once it starts to dim, the LED lights automatically turn on every night. They are specifically designed for road safety, can help prevent serious accidents and emit light instead of reflecting it.
LED Solar Stud Light，The blue solar stud light is made of high quality polycarbonate, which means it won’t be damaged even if a car or truck runs over it, it can withstand 20 tons of pressure, enough for any road. Each light features 6 high quality LEDs that deliver over 875 yards of visible ultra-bright and steady light.
Looking for ideal Solar Road Stud Manufacturer & supplier ? We have a wide selection at good prices to help you get creative. All the Solar Led Road Stud are quality guaranteed. We are China Origin Factory of Aluminum Road Stud. If you have any question, please feel free to contact us.
solar road stud The double-sided 6-lamp Led Reflective Aluminum Cat Eye Solar Road Stud shell design, strong impact resistance, strong and durable. The solar panel is embedded in the aluminum frame, so that it can better absorb solar energy and will not be damaged by rolling.
Solar cat eyes is a kind of traffic warning light, which consists of plastic shell, solar panel, controller and light-emitting unit (LED) to manage the safety facilities of road traffic. It mainly installed in those dangerous roads or bridges with potential safety hazard, such as ramp, school gates, diverted traffic,road corners,pedestrian ways,etc. Solar road studs is charge in Daytime,it will automatically lighting at night,it is use in the side of the road,village,Park,Garden or seaport.
This road stud light is designed to guide vehicle and pedestrian in the right direction. Powered by solar energy, it is more environment-friendly and with light sense function, it will automatically light up when it turns dark. Guiding by this light, people will be safer on the way.
With more than 8 decades of experience in the field of Industrial traffic Safety Products, NOKIN has emerged as a respectable leader in the supply of solar road stud lights. This solar aluminum road stud light size 110x97x24 mm, made of cast aluminum with lens reflective and high brightness LEDs in flashing or steady working mode. Optional color for customers choice, yellow,red,blue,white,green,etc.
Keep your roadways well lit through the night with this Bidirectional Solar Road Stud from NOKIN Traffic. Made of high-quality polycarbonate and aluminum alloy, this solar road stud can handle a compression load of up to 20 tons with ease while eliminating the fear of being crushed or damaged with use 6 bright LED lights provide you with a powerful light that is visible from a distance of up to 700 yards at night. The heavy-duty construction includes a rating of IP68 making it the ideal light to handle nature’s everyday elements while lasting for years to come. Make this your ideal light to illuminate your deck, dock, stairs, or driveway!
Solar road studs act as guides, telling drivers where the road is and how to turn. They work day or night and provide visibility regardless of the weather. They tell the driver that his car is moving into another lane by providing auditory and haptic feedback. Road studs on the edge of the road stand out and help the driver to judge the boundaries of the road. This reduces the chance of the vehicle veering off the road.
The intelligent cat’s eyes light up in response to changing traffic lights – turning a major roundabout into what looks like an airport landing strip. It is the first time they’ll be installed at a motorway junction in a bid to improve safety, Highways England said. The intelligent ‘road studs’ – the new name given now that the term cat’s eyes is being scrapped because foreign drivers took the term literally and believed they were made from real animal parts – will be used to help 90,000 motorists navigate the confusing junction every day.
Solar road studs are one of the most important devices to keep cars from veering off the road or driveway and make our roads safer. Solar road studs reflect light from car headlights, allowing drivers to observe the curves and corners of the road from a distance. Even in the dark, the driver can easily see the route, end point and corner of the road, and judge where to turn and which lane of the road to take, so as to drive safely. This makes the stud very useful on roads with low light. They provide effective nighttime guidance even in adverse weather conditions.
Driving down a dark road, you may see occasional flashes from some of the equipment installed on the road. These devices are called road studs or cat’s eyes (due to their design) or raised pavement markings. These objects consist of a lens or sheet that enhances the visibility of vehicle headlights by reflecting light from them and makes the road visible to drivers. They are glued or fastened into the pavement for lane markings and delineation of nighttime visibility.
Shenzhen NOKIN Transportation Facilities Co., Ltd. is located in Shenzhen. It is a high-tech enterprise specializing in the production of solar energy and LED transportation products. Shenzhen NOKIN Solar takes “safely together, NOKIN in the world” as its motto, and has gradually created a number of solar LED transportation products. After 21 years of hard work, most of our products are exported to Germany, France, Australia, New Zealand, Saudi Arabia, Dubai, Indonesia, Malaysia, Vietnam, South Africa, Kenya, Brazil, Chile, etc…
Smart cat’s eyes to light up major roundabouts like airport runways to stop drivers crashing into each other Intelligent ‘road studs’ are linked to traffic lights and help keep drivers in lanes
When the lights go green, each lane will be clearly marked to prevent accidents.
New designs following with the market’ changesin. In order to meet with more clients’ requirement and needs. We are the professional solar road stud, reflective road stud, all in one solar road stud manufacturer and supplier in China. We can produce solar road stud, reflective road stud with preferential road stud price and top quality according to your requirements. For more details about the road stud for sale, please contact us.
The Solar Road Stud can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning to drivers in darkness and bad weathers. The solar system of aluminum road stud is conducive for reducing environmental impact and saving costs. With more than 20 years of factory experience, cat eye road stud produced by our company owns competitive aluminum road stud price and offers more choice to global traffic road safety market and trustworthy partners all over the world.
Solar road studs automatically start working when night falls or bad weather begins to save energy. No UV rays, environmentally friendly.This aluminum alloy LED road stud is naturally charged by sunlight. The battery may be exhausted due to long-term inventory, this is not a malfunction, please install it in the sun to charge it when you use it.
Automatically charge during daytime. Auto turn on at night and off at sunrise. It has 6 premium quality LED Bulbs which give out a super bright light, provide up to 10 hours lighting of night. No UV rays, environment-friendly. Adding attractive decor to any space. Solar road stud lights are made of high-quality aluminum alloy casting frame that effectively keeps them from rusting even in the bay, and the tightly sealed battery compartment can withstand rain, snow and harsh sunlight and will not be damaged. Making it suitable for most types of environments. It is perfect to use for outdoors.
These solar-friendly, LED-based smart road studs are purpose-built to improve safety and reduce road accidents by providing drivers with information about the road ahead directly in their natural field of vision. Solar road studs have been specifically designed to save lives and reduce road accidents by providing up to ten times greater visibility and better durability in the harshest conditions. Find the right spot on the approach road to India’s tallest office Six ultra-bright LEDs with a brightness of 10,000 to 18,000 mcd (Millicandela). 3 to 5 years lifespan.、
Solar road studs have no UV rays and are environmentally friendly. The solar dock light uses a high-quality aluminum alloy casting frame, which can effectively prevent rust even in the bay, and the tightly sealed battery compartment can withstand rain, snow and harsh sunlight without damage. Make it suitable for most types of environments. Great for outdoor use. It’s perfect as a sun driveway marker to illuminate your driveway, or it can be used on docks, decks, paths, driveways, gardens, walkways, walkways, yards or patios.
Solar road studs are designed for decoration and lighting. It charges automatically during the day and lights up after dark. Using die-casting aluminum shell, reflective film, PC material top cover, this lamp is IP68 waterproof, anti-ultraviolet, anti-yellowing. It can withstand up to 20T/44000LBS pressure, which means it will not be damaged even if a car or luggage runs over it. With 6 5mm super bright LEDs, this light is visible even from a distance of over 800 yards. This solar base light can work for 40 hours per day at standard intensity on a charge and 72+ hours on a full charge.
Solar Road Studs are ground lamps, used to mark potential danger zones in road traffic. Compared to passive reflectors, solar collectors are active in the dark (LED technology), which increases the visibility and marking effect up to 1000 meters. This makes it possible to efficiently mark neuralgic areas such as pedestrian strips, traffic islands, curves, round abouts, etc. The SolarVision SV2 road studs is suitable to drive over. It is designed to install flat into the roadsurface, there is no danger for two-wheelers. Maintenance machines such as snow plows, sweepers etc. are also not hindered.
Road-studs are integral to traffic safety at night on our roads. This is especially true when conditions are wet as well as dark. In this situation, raised profile road-studs are often the only remaining form of guidance for drivers. It is therefore important that studs retain a high level of long term retro-reflectivity, whilst providing excellent adhesion to the road surface. We can offer an extensive range of temporary and permanent reflective road studs. A number of stud installation techniques can be employed to suit all site conditions.
The purpose of the road studs is to enable the drivers to completely judge the form of the road. In the night time, the driver is unable to see the road alignments, ends, and corners of the road. Because of the lack of road lights, it becomes necessary to install the road studs
This solar road stud is designed to lead vehicle and pedestrian to right direction. Viewing distance up to 1000m/3280.8ft, which can effectively provide the driver with safe driving direction.Solar power design, using LED as light source, energy saving and environmentally friendly. It is recharged by solar panels under sun light, automatic charging during the day, automatic lights up at night.
Solar road studs automatically start working when night falls or bad weather begins to save energy. No UV rays, environmentally friendly.
This aluminum alloy LED solar road stud is naturally charged by sunlight. The battery may be exhausted due to long-term inventory, this is not a malfunction, please install it in the sun to charge it when you use it.
The LED lights automatically turn on as the night begins to dim.
Designed for road safety, solar road studs help prevent serious accidents and emit light instead of reflecting it.
Solar studs are now widely used for controlling traffic flow with a wide number of applications. In practice, such systems operate well above the road surface with a number of well known and widely accepted colors, with lights in particular orientations to make the message to a driver clear and univocal, thereby improving the traffic flow of the road and enhancing safety aspects. The new designed and patent solar stud could stand the pressure of 30 Tons so that cars can drive on the solar led marker lights directly.
Roadway lighting systems are now widely accepted as essential for controlling traffic flow in a wide number of applications. In practice, such systems operate well above the road surface and use a number of well-known and widely accepted colors, with lights in particular orientations to make the message to a driver clear and univocal thereby improving the outturn of the road while enhancing safety aspects. Solar studs are one of the roadway lighting systems. Solar road studs to illuminate roadways without a power grid.
Square Road Stud Light A6B have two work modes and 5 colors. Solar road studs are charged in the Daytime, they will automatically lighting at night,it is used on the side of the road, village, Park, Garden, or seaport. Square Road Stud Light provides effective night guidance during night hours and in adverse weather conditions. Square Road Stud Light are easily visible and can make road more safety.
Motorway Solar Road Studs are made of high-quality aluminum alloy casting that effectively keeps them from rusting even in salty air environments, and the tightly sealed battery compartment can withstand rain, snow, and harsh sunlight and will not be damaged. Making it suitable for most types of environments. Therefore, a solar road stud is perfect for outdoor use.
Solar road studs are naturally charged by the sun. As soon as it starts getting dark the LED lights in the road stud come on automatically each night. Solar road studs have been specifically designed with road safety in mind and can help to reduce accidents at a regional rail crossing, or intersection and provide guidance and hazard warning to drivers in darkness and bad weather.
Blinking road stud lights provide effective night guidance during night hours and in adverse weather conditions. The road stud lights are easily visible and can be heard and felt due to the rumble when a vehicle crosses over them. Available in different aluminum and rigid plastic sizes for both center division and to delineate edges, these road stud lights are highly impacted proof and known for reflectivity.
This plastic solar road stud has 10 pcs led beads and 360-degree visibility, The anti-UV PC shell will not turn yellow for a long time, and the high-conversion solar panel can be charged quickly. Solar-powered road stud lights are charged in the Daytime, it will automatically light at night,it is used on the side of the road, village, Park, Garden, or seaport.
The high-efficiency solar panel enables the NOKIN solar road stud X5 to be powered by solar energy, which can work continuously for more than 48 hours. The service life of the NOKIN solar road stud X5 is up to 5-8 years. Flashing NOKIN solar road stud X5 can display mode flashes 120 times per min or is always on for selection. The solar road stud display colors are white, yellow, red, green, and blue. The display device is super bright LED, with 3 light beads on one side, one side or two sides, more than 800m visible distance.
We specialize in: solar road stud lights, reflective road studs, solar traffic signs, solar street lights, and road marking machines. Shenzhen Nokin Traffic Facilities Co., Ltd. is a customer-oriented manufacturer of high-tech road stud lights. After more than ten years of hard work, Nokin Traffic has established a good reputation in the quality and customer service of OEM / ODM projects.
ABS Led Road Stud For Walkway q7 has five colors: white, yellow, blue, red, and green. Up to 800 meters of visibility is assured by a high bright LED. Even in extreme weather, the LED road stud can at least reach 500m visual distance and provide safety for pedestrians. This led road stud suitable outdoor parking areas, blind speed areas, ports, junctions, islets authorities walkways.
The aluminum frame-made NOKIN Road Stud Light X6 can stand greater impact. Compression resistance of 40 tons. Sand-blasted and curved smooth edges can better buffer the tire compressors. The water-proof level can achieve the industry standard IP68. Little power consumption and long life span. The new-developed solar road stud light x6 has 6pcs ultra bright LEDs make the visible range more than 800 meters.
Aluminum Road Stud Lights have been specifically designed with road safety in mind and can help to reduce accidents at regional rail crossings, and intersections and provide guidance and hazard warnings to drivers in darkness and bad weather. The solar system of aluminum road stud light is conducive to reducing environmental impact and saving costs and to make road safety.
This Bi-Directional LED Solar Road Studs are available in white, yellow, blue, green, and red 5 colors. Luminous intensity is 5,000 mcd. The long-lasting solar cell enables us to guarantee the marker for one year of nonstop illumination. Available in all colors, flashing or steady. Have 6 safety screws, One year warranty on led solar road stud should last 2 to 3 years under normal conditions.
Solar LED Road Stud is easy to install, needs no external power, and a paved circuit can be firmly installed by epoxy resin glue or screws. Led road studs have an excellent warning effects. All LEDs can perform more soundly in active lighting and high brightness. Those solar led road studs charge in day time and discharge at night automatically.
NOKIN Bidirectional Road Stud Light with polycarbonate material adopts a reinforced and solid cast aluminum shell, Bidirectional Road Stud Light NK-143 with 6 pcs aluminum alloy safety locks, the pressure-resistant and explosion-proof polycarbonate mask, the material is stable and strong, with strong pressure resistance. The static pressure is more than 40 tons, and it is durable.
Solar road stud installation is not a complicated matter, but there are many details that require attention. These details play an important role in ensuring the quality and service life of road studs. Correct installation of motorway solar road studs can ensure the service life of road studs, so as to make full use of their value to road safety.
Shenzhen Nokin Traffic Facilities Co., Ltd. is a factory that specialized in developing, producing and selling solar Pavement Levelled Marker. From 2001, we begin to engage in solar traffic products. To make our solar road studs with high quality and lower price, we invited the industry senior team to design, develop and test. And just another 2 years later, we gain 40% of the market share in Pavement Levelled Marker. So we are really confident to do better now.
Solar road stud marker installation is not a complicated matter, but there are many details that require attention. These details play an important role in ensuring the quality and service life of road stud markers. This is most important, please placed in isolation facilities installation safety first, then everyone should be in the safe facility when installing. Determine the installing location. To ensure the installation location is smooth, should level scalable, cracks, uneven pavement first, also please be sure the solar panel is being shined by sunlight.
NOKIN round solar road stud light is charged in the Daytime, it will automatically light at night, it is used on the side of the road, village, Park, Garden, or seaport. After 16 years of effort, most of our road stud lights are exported to Germany, France, Australia, New Zealand, Saudi Arabia, Dubai. Shenzhen Nokin Traffic Facilities Co., Ltd, located in Shenzhen, is a hi-tech enterprise specialized in manufacturing solar& LED traffic products.
Shenzhen Nokin Traffic Facilities Co., LTD was founded in 2001, has more than 20 years of experience in the production and manufacturing of led road stud lights, the main products are LED road stud lights, LED street lights, led traffic sign, and road marking machine, etc. Occupy solar LED road stud light source of the complete product line, and has a number of led road stud light patent.
Active lighting of aluminum led road stud not only minimizes the interference of rain and fog, but also protects the driver’s line of sight from the effects of automotive lighting. Aluminum Led Road Stud provides the driver with a safe driving direction with a visible distance of 800 meters.
Bi-Directional Solar Pavement Levelled Marker allows drivers to see the road ahead beyond their headlight beam. Compared to traditional retro-reflective road studs drivers can see ten times further on a road with active road studs. This gives a driver ten times longer to respond to a change on the road ahead, which reduces erratic driving behavior.
NOKIN Outdoor Plastic LED road stud for freeway provides long-lasting illumination in one of five colors, perfect for maintaining recreational or emergency traffic and road safety lighting around residential and commercial locations. The LED road stud can be used in sharp turning roads, fog areas (sea roads and airport roads), highways, and roads without street lights.
Solar Road Stud X6 is equipped with a solar panel and rechargeable battery.No wiring, and no electricity cost. Strong and Durable, Static pressure resistance over 40 tons, which means the solar road stud will work well even if the car or truck run over it.
Apart from being used as a led road stud, these aluminum LED markers can be installed in many other locations to draw attention to danger and obstacles: airports, pedestrian stairs, zebra crossings, entrances or exits, etc.
In many places in the Philippines, you can see the solar road studs, those lights outline the road. On the road without street lights, the vehicle can drive safely and see the direction of the road. Use of solar road studs reduces the necessity of headlight main beams and the accompanying hazard of dazzling oncoming drivers.
The Transport Research Laboratory (TRL) has carried out research proposing that the application of solar Pavement Levelled Marker influences safer driving behaviour. For example, drivers are significantly less likely to cross the central white line, or to move out of lane on a dual carriageway and braking is more consistent and less erratic. Moreover, the solar Pavement Levelled Marker reduce the use of headlight main beam thereby minimising the risk of dazzling oncoming drivers
The Blinking Solar Stud uses high brightness LEDs (Light Emitting Diodes) to provide visibility up to ten times greater than that of traditional retro-reflective studs, and unlike conventional retro-reflective road studs, the Blinking Solar Stud does not rely on vehicle headlight efficiency to perform effectively.
Solar pavement levelled markers are unique road safety devices, which provide clearly visible traffic guidance in all weather conditions. Our solar pavement levelled markers are easy to install, rugged in built and compact in size. The product incorporates flashing LEDs and is ideal for usage on curbs, bends, crossings, driveways & porches.