English 中文
Your Position : Home > Products > Solar road stud
Raised road stud NK-RS-A1
Raised road stud NK-RS-A1
Raised road stud NK-RS-A1
Raised road stud NK-RS-A1
Raised road stud NK-RS-A1
Raised road stud NK-RS-A1

Raised solar road stud NK-RS-A1

Recommended products,aluminum shell,small size
Power Supply: Solar panel(mono crystalline 2.5V/0.25W )
Battery: NI-MH; Lithium battery
Size: L104*W94*H20MM
LED color :
Waterproof: IP68
Introduction
Specification
Application
Inquiry
Product introduction :
 
Solar Road Stud also know as cat eyes,can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning to drivers in darkness and bad weathers. The solar system of ssolar powered led cats eyes is conducive for reducing environmental impact and saving costs. With more than 15 years of factory experience, solar led road stud reflectors produced by our company owns competitive solar road stud lights price and offers more choice to global traffic road safety market and trustworthy partners all over the world.
 
      solar LED road stud waterproof test    solar LED road stud     solar LED road stud specifications

Working Principle of Solar LED Road Stud :

During the day, solar panels absorb sunlight and convert solar energy into electrical energy, which is stored in energy storage devices (batteries or capacitors). At night, the electrical energy in the energy storage devices is automatically converted into light energy (controlled by photoelectric switches) and emitted by LEDs. Bright light outlines the road and induces the driver's sight. Solar road studs will starts automatically to flash when night falls or with the onset of inclement weather .The bright flashing LEDs are highly effective at getting the attention of drivers much earlier than conventional road studs.

 
Installation Method Of Raised Solar Road Stud:

1. Determine the installation location and distance, clean the road surface, and ensure that the solar road studs are installed on a flat road surface.
2. Clean the bottom of the solar road stud and apply the epoxy glue evenly to the back of the studs.
3. Press the side with the glue on the road, fix the position, wait for the glue to dry.
4. Check within 2 hours of installation to ensure that all studs are not installed incorrectly and are not bent or deformed due to compression.
5. Remove the installation isolation facility within 6-8 hours after the installation of the solar road studs.

 

The recommended spacing between each solar road studs are as follows:

Highways and Expressways       
7 - 8 yards (5 - 6 meters)
Dangerous Entrances and Exits       
4 - 5 yards (2 - 3 meters)
Access or Exit ways for Hospitals, Parking Lots, etc.       
0.5 - 3 yards (0.5 - 2 meters)

The spacing between of each solar studs also according to your actual application requirements, the above values are for reference only.



Application:

NK-RS-A1 solar road stud light can be used in Urban road,parking lot,Steps, Trucks and other public places,following is some application examples from our clients for your refrence, more application cases, pls vist our cases page;
 
      solar LED road stud    solar LED road stud in parking lot    solar LED road stud in steps
Raised solar road stud NK-RS-A1
Characteristic:
-Super power capacity, Longer life (More than 10 years). 
-Working model: Recharging at day and working automatically
-Working period:Full recharging for 8hours and working in 120hours constantly.
- Accept OEM/ODM
-Suitable for edge line of road and pavement
-Can use over 180hrs in the foggy or rainy day after fully charged
-Can work more than 3 years normally
 
Specification :
Body material Hi-pressure Casting Aluminium alloy
Power supply Solar panel(mono crystalline 2.5V/0.25W)
Battery NI-MH 1.2V/800MAH
LED Ultra bright diameter 5mm;6pcs double side
LED color Red, Yellow, Green, Blue, White
Working mode Blinking or constant(flashing frequency 2Hz,also can be made according to your requirements)
Visual distance >800m
Working hours Fully charge at 8hours and can working 120hours continuously
Water proof IP68
Life span >3years
Load capacity >20T
Size L108mm*W97mm*H25mm  (L4.25"*W3.82"*H0.98")
Packing 45pcs/ctn(1pc/box)
Carton size 58.5*24.5*18.5cm   (23.03"*9.65*7.28")
Carton weight 21kgs  (46.30bs)

NOKIN Traffic has now exporting more than 50000 smart solar road studs around the world. NOKIN Traffic is the solar road studs manufacturer in China, we have advanced production equipment, and international management philosophy,and now NOKIN Traffic has 5 product patents. All the products are CE ROHS FCC certified, and meet the standard of ASTM D4280&EN1463-1 of Europe and America countries. The quality of its products wins praise of customers home and abroad.
 
solar studs light supplier     solar studs light supplier    road studs manufacturer
Send Your Inquiry
Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.
Name:
Country:
* Email:
Phone:
* Inquiry: