English 中文
Your Position : Home > Products > Solar road stud
solar road stud NK-RS-Q7
solar road stud NK-RS-Q7
solar road stud NK-RS-Q7
solar road stud NK-RS-Q7

Solar road stud NK-RS-Q7

Hot-selling product,ultra-thin solar road stud,thickness only 11 mm
Power Supply: High Efficient Solar Panel(5V/60mA)
Battery: Lithium battery(3.2V/500mAh)
Size: 114*90*11 mm
LED color :
Waterproof: IP68
Introduction
Specification
Application
Inquiry
Description:
 
Solar Road Stud also know as cat eyes,can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning to drivers in darkness and bad weathers. The solar system of solar powered road studs is conducive for reducing environmental impact and saving costs. With more than 15 years of factory experience, raised pavement markers produced by our company owns competitive solar road studs price and offers more choice to global traffic road safety market and trustworthy partners all over the world.

The thickness of this new type raised pavement markers is only 11mm, more thinner than traditional solar road stud whose thickness is usually 20-30mm.
When people walk or ride through these solar raised pavement markers,they will feel smoother, less prone to tripping and feel less bumpy。
These solar studs are most commonly used in parks or sidewalks, but maybe you have new ideas where they can be used!
 
      solar road stud waterproof test    solar road stud compression test    solar road stud compression test

Working Principle of Solar Road Stud Light:

During the day, solar panels absorb sunlight and convert solar energy into electrical energy, which is stored in energy storage devices (batteries or capacitors). At night, the electrical energy in the energy storage devices is automatically converted into light energy (controlled by photoelectric switches) and emitted by LEDs. Bright light outlines the road and induces the driver's sight. Solar road studs will starts automatically to flash when night falls or with the onset of inclement weather .The bright flashing LEDs are highly effective at getting the attention of drivers much earlier than conventional road studs.

 
Installation Method Of Raised Solar Road Stud:
  • Determine the installation location and distance, clean the road surface, and ensure that the solar road studs are installed on a flat road surface.
  • Clean the bottom of the solar road stud and apply the epoxy glue evenly to the back of the studs.
  • Press the side with the glue on the road, fix the position, wait for the glue to dry.
  • Check within 2 hours of installation to ensure that all studs are not installed incorrectly and are not bent or deformed due to compression.
  • Remove the installation isolation facility within 6-8 hours after the installation of the solar road studs.
 

The recommended spacing between each solar road studs are as follows:

Highways and Expressways       
7 - 8 yards (5 - 6 meters)
Dangerous Entrances and Exits       
4 - 5 yards (2 - 3 meters)
Access or Exit ways for Hospitals, Parking Lots, etc.       
0.5 - 3 yards (0.5 - 2 meters)

The spacing between of each solar studs also according to your actual application requirements, the above values are for reference only.


Application:

NK-RS-Q7 road stud light can be used in Bike lane,Urban road,Farm,Bridge, Pillar, Garden and other public places, following is some application examples from our clients for your refrence,more application examples, pls visit our cases pages.
 
     solar road stud on bridge    solar road stud in dock    solar road stud in park
Solar road stud NK-RS-Q7
solar road marker Characteristic:
-Only 11mm thickness 
-USA brand flexible solar panel,high conversion and charge efficiency
- High temperature battery: work normally at high temperature
-Program PCB has high stability
- Bullet LED has high brightness
- Accept OEM/ODM
 
solar road marker Specification :
Body material PC
Power supply High efficient solar panel(5V/60mA)
Battery Lithium battery(3.2V/500mAh)
LED Ultra bright diameter 5mm( 6pcs)
LED color Red, Yellow, Green, Blue, White
working mode Recharging at day and working automatically at night
Flashing mode Blinking or constant
(charging at daytime and working automatically at night)
Life Span 5years for Lithium battery;
Waterproof IP68
Visual distance >500m
Working temperature: -20°C-80°C
Load capacity >15T
Size 114*90*11mm  (4.49"*3.54"*0.43")
Package: 2pcs/box;100pcs/ctn;weight:14.5kg;carton size:48*27*21.5cm
(2pcs/box;100pcs/ctn;weight:31.97bs;carton size:18.90"*10.63"*8.46")

NOKIN Traffic has now exporting more than 50000 smart solar road studs around the world.  NOKIN Traffic is the solar road studs manufacturer in China, we have advanced production equipment, and international management philosophy,and now NOKIN Traffic has 5 product patents. All the products are CE ROHS FCC certified, and meet the standard of ASTM D4280&EN1463-1 of Europe and America countries. The quality of its products wins praise of customers home and abroad.
 
      solar studs in production 
Send Your Inquiry
Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.
Name:
Country:
* Email:
Phone:
* Inquiry: