(English)
English Spanish
Your Position : Home > Products > Solar road stud
solar road stud for sale
solar road stud for sale
solar road stud for sale
solar road stud for sale

ABS Solar Road Stud NK-RS-F1

Solar Road Stud can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning to drivers in darkness and bad weathers.
Power Supply: Solar panel(mono crystalline 2.5V/0.25W )
Battery: NI-MH or Lithum battery
Size: L102*W102*H23 mm
LED color :
Load capacity: >20T
Introduction
Specification
Application
Inquiry
Product introduction :

 


 
Solar Road Stud also know as solar cat eyes,can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning to drivers in darkness and bad weathers. The solar system of solar led road studs is conducive for reducing environmental impact and saving costs. With more than 15 years of factory experience, solar markers produced by our company owns competitive solar road stud lights price and offers more choice to global traffic road safety market and trustworthy partners all over the world.
solar-road-stud-F1
  
        

Working Principle of Solar LED Road Stud :

During the day, solar panels of solar cat eyes absorb sunlight and convert solar energy into electrical energy, which is stored in energy storage devices (batteries or capacitors). At night, the electrical energy in the energy storage devices is automatically converted into light energy (controlled by photoelectric switches) and emitted by LEDs. Bright light outlines the road and induces the driver's sight. Solar road studs will starts automatically to flash when night falls or with the onset of inclement weather .The bright flashing LEDs are highly effective at getting the attention of drivers much earlier than conventional road studs.

 
Installation Method Of Raised Solar Road Stud:

1. Determine the installation location and distance, clean the road surface, and ensure that the solar road studs are installed on a flat road surface.
2. Clean the bottom of the solar road stud and apply the epoxy glue evenly to the back of the studs.
3. Press the side with the glue on the road, fix the position, wait for the glue to dry.
4. Check within 2 hours of installation to ensure that all studs are not installed incorrectly and are not bent or deformed due to compression.
5. Remove the installation isolation facility within 6-8 hours after the installation of the solar road studs.

solar-road-stud-for-sale

 

The recommended spacing between each solar road studs are as follows:

Highways and Expressways       
7 - 8 yards (5 - 6 meters)
Dangerous Entrances and Exits       
4 - 5 yards (2 - 3 meters)
Access or Exit ways for Hospitals, Parking Lots, etc.       
0.5 - 3 yards (0.5 - 2 meters)

The spacing between of each solar studs also according to your actual application requirements, the above values are for reference only.



Application:

NK-RS-F1 solar studs light can be used in Urban road,parking lot, Garden, Roadside and other public places,following is some application examples from our clients for your reference, more application cases, pls visit our cases page;
/solar-road-stud-case
       
ABS Solar Road Stud NK-RS-F1
Characteristic:
-Ultrasonic welding, not easy to fall off, good sealing
-Super power capacity, Longer life (More than 10 years). 
-Working model: Recharging at day and working automatically
-Working period: Full recharging for 180 hours for flashing, 40 hours for steady in fog or rainy days
- Accept OEM/ODM
-Suitable for edge line of road and pavement
-Can work more than 3 years normally
Specification :
Product Name solar road stud NK-RS-F1
Body material ABS
Power supply
Solar panel( monocrystalline 2.5V/0.25W)
Battery NI-MH 1.2V/ 600mah(high temperature resistance);
Lithum battery  3.2V/500MA;
LED Ultra bright diameter 5mm 6pcs
LED color Red, Yellow, Green, Blue, White
working mode Recharging at day and working automatically at night
Working hours (1).Blinking:140hours for NI-MH battery; 130hours for lithum battery.
(2).Constant:40hours for NI-MH battery; 35hours for lithum battery.
Life span 2years for NI-MH battery;
5years for Lithum battery;
Visual distance >800m
Water proof IP68
Resistance >20T
Size L102*W102*H23mm  (L4.09"*W4.09"*H0.78")
Package: 2pc/box;60pcs/ctn;  weight: 21kgs; 
Carton size 58.5*24.5*18.5cm   (23.03"*9.65"*7.28")
Quality: ASTM D4280 & EN1463-1 standard

NOKIN Traffic has exported solar road studs with more than 10 years experience.  NOKIN Traffic is the solar road studs manufacturer in China, we have advanced production equipment, and international management philosophy,and now NOKIN Traffic has 5 product patents. All the products are CE ROHS FCC certified, and meet the standard of ASTM D4280&EN1463-1 of Europe and America countries. The quality of its products wins praise of customers home and abroad.
solar-road-stud-supplier     
Send Your Inquiry
Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.
Name:
Country:
* Email:
Phone:
* Inquiry: