Intelligent Pedestrian System

Due to the continuous development and application of the solar energy industry, the use of LED solar studs is becoming more and more widespread. It not only involves highways and traffic intersections but also gardens, etc. It can play a beautifying role in the environment and is a sustainable development path.

The brightness of solar road studs means that they stand out better than reflective studs in adverse weather conditions, such as snow and rain, where the light from headlights can be refracted or obscured. They are also highly durable, with similar longevity to traditional milled road studs.

Solar road stud is a new type of active luminous warning product for road traffic facilities. Solar Studs uses LEDs and combines with reflectors to emit light. It is mainly set on the curbstone, on the separation of the fast and slow lanes, and is generally used in conjunction with the marking line.

Solar Road Stud is suitable for low and medium speed road warning lane

Depending on the actual road conditions, you can select a continuous producto, single or multiple products, combined to install them on the road pavement either on one or both sides.

At night, its signaling funtion provides drivers of motor vehicles with orientation instructions, as well as drivers of non-motorized vehicles and pedestrians. In this way, it greatly improves road safety at night.

Solar road studs in Intelligent Pedestrian System Using for sidewalks, warning drivers and pedestrians, to ensure the crosswalk traffic safety, Solar road studs Can be combined with traffic lights, indicating the state of road traffic, traffic lights to reduce the intersection of the dead, NOKIN solar road stud X5 Coordinating with thermal imaging detectors, geomagnetic sensor, installed in the crosswalk or accident-prone area, automatic work to increase road safety. Embedded design makes solar road stud X5 400KN compression, can be installed in the sidewalk zebra, road centerline.

The number of X5 road warning lights required for an in roadway warning lights system depends on the number of lanes in the road. A typical two-lane road requires five lights embedded in the road on either side of the crosswalk – ten lights in total. Lights in the roadway are placed outward from the center of the crosswalk to alert oncoming motorists in any direction. Likewise, a typical four-lane road requires seven lights facing outwards in each direction, for a total of fourteen lights.

In-road warning lights (IRWLs) are embedded in the pavement to clearly outline a crosswalk and rapidly flash in unison to alert distracted drivers that pedestrians are actively crossing. In-Road Warning Light Systems are ideally suited for mid-block crosswalks, school zones, high volume crosswalks, and high speed roadways. Crosswalk lighting systems doubled rates of drivers yielding to pedestrians at crosswalks.

When led road studs and intelligent transportation systems are combined, they have different effects. Intelligent transportation systems are a combination of leading-edge information and communication technologies used in transportation and traffic management systems to improve the safety, efficiency, and sustainability of transportation networks, to reduce traffic congestion and to enhance drivers’ experiences. The possibilities are endless.

After Smart Pedestrian Crosswalk System is activated, the daytime visible road stud light beads and day&night mode luminous traffic signs direct the driver’s perspective to warn the driver that there are or will be pedestrians passing the crosswalk, please slow down and give way.
The road stud light board directs pedestrian perspective and warns the pedestrian that you are or will pass the crosswalk, please be careful. Driver-pedestrian warning at the same time to effectively ensure the safety of pedestrian crossing.

The NOKIN Pedestrian Crosswalk Warning Light Systems can be widely recognized by the masses which is inseparable from our company’s serious attitude. We have always been based on safety, intelligence, and innovation, with “warning” as the core, and “letting traffic hazards be seen” as the guide, deeply researched and developed the intelligent pre-warning system, which aims to effectively transmit each warning signal, effectively solve traffic problems, and protect both drivers and pedestrians’ safety.

Smart Crosswalks System aims to prevent traffic accidents by effectively warning drivers at pedestrian crossings. When the button on it is pressed, the warning system activates and the LED warning light flashes to encourage drivers to be careful. In this way, pedestrians can safely cross the street. This special system runs entirely on solar energy.

The main objective of the Intelligent Pedestrian System is to increase traffic safety for pedestrians in busy areas. Some led road stud lights are installed next to pedestrian crossings, making them more visible to drivers and let drivers know that there are people crossing or who intend to cross them.

At NOKIN, we achieve this by enabling additional perception for the vehicles through road side sensors, for example by using our Smart Pedestrian Crosswalk to see behind corners and detect road users well in advance. The Smart Pedestrian Crosswalk supports V2X (infrastructure-to-vehicle) communication enabling automatic communication between all communication-ready traffic entities.

Intelligent pedestrian crosswalk system is a multifunctional C-ITS device, which improves traffic safety on unregulated pedestrian crosswalks. The design of the device is intended to comply with all requirements concerning roadside C-ITS applications. The main task of the Intelligent pedestrian crosswalk system is to improve the awareness of road users located nearby and to notify road users of the probable traffic hazard. The system is adaptive so it reacts accordingly to the situation. Hardware is meant to be modular and can be retrofitted on the existing infrastructure.

Aluminum Road Stud Lights have been specifically designed with road safety in mind and can help to reduce accidents at regional rail crossings, and intersections and provide guidance and hazard warnings to drivers in darkness and bad weather. The solar system of aluminum road stud light is conducive to reducing environmental impact and saving costs and to make road safety.

The Blinking Solar Stud uses high brightness LEDs (Light Emitting Diodes) to provide visibility up to ten times greater than that of traditional retro-reflective studs, and unlike conventional retro-reflective road studs, the Blinking Solar Stud does not rely on vehicle headlight efficiency to perform effectively.

When night comes, when you step on the zebra crossing, the aluminum road stud marker under your feet will cast a shining red light, “guarding” the pedestrians safely through the zebra crossing. It turned out that the pedestrian crossing thermal induction system was installed on the zebra crossing here to remind motor vehicles to slow down before the zebra crossing.

The shape of solar road stud light X5 is really different. The solar road stud X5 is a cylinder. As seen above, NOKIN solar road stud light X5 is round and covered by transparent solar panels. The road stud light X5 specification is φ 125*50mm. And the weight of the solar road stud X5 is 700g.

To be installed in the middle of the road, there is a risk of being crushed by the vehicles, so the pressure resistance of these solar road stud light is relatively high. NOKIN has a suitable solar road stud light, which can reach more than 40 tons. Use new technology to connect the solar smart road stud light to the red traffic light, which can achieve the function of synchronizing with the traffic light. At present, this solar smart road stud light has been used on the zebra crossing in Zhejiang, China. It flashes to warn vehicles to slow down and pay attention to pedestrians.

When night coming, when you step on the zebra crossing,the solar road studs under your feet will cast a shining red light, “guarding” the pedestrians safely through the zebra crossing. Solar road studs turned out that the pedestrian crossing thermal induction system was installed on the zebra crossing here to remind motor vehicles to slow down before the zebra crossing.

Solar road stud lights rely on their own light, which is very eye-catching at night, allowing drivers to easily find the demarcation line on the road they are driving, and can brighten the road. Nokin’s solar road studs are very popular in the Philippines and can be used in the center of roads and zebra crossings.

The Heavy Duty Embedded Solar Studs is a high quality weatherproof product for residential and commercial applications. The rugged, shock-resistant die-cast aluminum housing can withstand up to 40 tons of weight, external shocks and harsh weather and environmental conditions. The maintenance-free automatic light control system of Embedded Solar Studs allows for continuous operation of the LEDs for up to 72 hours in a variety of scenarios, including decks, docks, walkways, driveways, parking lots, driveways and islands.

The Embedded Flashing Solar studs provides travel hazard free, dusk to dawn overnight lighting that will clearly define the sidewalk or bike lane. This premium product is at the forefront of solar technology, providing supercapacitors for power storage in place of batteries, extending the life of the Solar studs to more than 8 years. Multiple colors and static or flashing modes are available. The light is designed in three parts, a cast aluminum base embedded in a substrate, a removable internal assembly filled with epoxy resin and a non-slip polycarbonate lens. The light is IP68 (submersible) rated for water resistance and rated at over 40 tons for road mounting.

Solar road markers are low-cost, self-contained, solar-charged, LED-illuminated markers. They can be used to reduce speed and alert drivers to common features, hazards and dangerous curves on the road. Solar road markers are not intended to be used as a replacement for reflective overhead road markers (RRPM), but rather as a new high-tech warning device.

Solar Road Pavement Markers come in a variety of shapes and sizes and are available in amber, red, white, blue and green. Light patterns can be flashing or constant.
Solar Road Pavement Markers Provides clearly visible traffic guidance in all weather conditions! Fog and heavy rain – Wet roads reflect city and vehicle lights, making current lane lines virtually invisible!

The solar panels of NOKIN Solar Road Studs use monocrystalline silicon. Monocrystalline silicon is a relatively active non-metallic element. In addition to its general characteristics, it also has the advantages of good purity and high solar conversion rate. The high-precision cast aluminum mold makes the solar road studs high strength, impact resistance, oxidation resistance, corrosion resistance, sturdiness and durability, stability, and reliability.

These Solar Road Marker are automatically charged by solar energy. Once the sky gets dark, the LED lights in the Solar Road Marker automatically illuminate for up to 10 hours a night. The solar LED road studs are designed to specifically consider road safety to help prevent serious accidents and send out rather than reflect light.

NOKIN Solar Road Stud use high strength aluminum housing with excellent compressive strength and scratch resistance. With high brightness LED, Solar Road Stud can be seen 800 meters away and remind the driver of the road ahead. Meet the environmental requirements.

Solar Raised Pavement Marker ensure your employees, visitors, contractors and members of the public safe in your workplace or near public access. Smart, safe, and sustainable surface mounted Solar Raised Pavement Marker improve night visibility and provide clearly visible traffic guidance in all weather conditions. Continuous glow for 50 hours, visibility of 800 m, color: red, white, yellow, green, blue.

Solar Raised Pavement Markers are an automatically powered autonomous device usually installed on the road center line, lane boundaries and pedestrian crossings to clearly guide drivers and pedestrians during nighttime, rainy or foggy weather. During the day, Solar Raised Pavement Marker charge rechargeable cells through a small built – in solar panel module, so it acts as an effective safety mark in the darkness.

NOKIN Solar Road Pavement Markers, offering clear outlines and over 1, 000m after day and night, allows a customizable, highly visible Solar Road Pavement Markers road lighting system to increase lane discipline and reduce at roundabouts, road accident and collision intersections, crosswalks, bus stops, rail crossings and tunnels.

The raised Solar Road Stud (also known as “Solar cat eyes” ) absorb the energy of sunlight during the day and glow with high visibility LED lighting and backward reflectors, creating high visibility light that guides the driver and drive. Improve road safety. Solar LED road studs are also known as Solar elevated road face signs, solar reflective lane signs and solar warning devices.

Solar road studs are more visible from the front road layout than forward reflective road nails. All night, reliable all year, a longer service life than traditional road stud, easy operation, and excellent vision even in harsh weather conditions. On wet roads, solar road studs can reduce nighttime traffic accidents by more than 70 percent, enhance the driving experience, and make drivers feel safer and better able to travel at night.

NOKIN TRFFIC specializes in producing solar products such as solar road markers, solar road signs, solar guardrail lights, Solar bricks, Solar road safety products, Solar traffic warning lights, Solar Edge warning lights, solar deck lights, solar road stud, and many more. Furthermore, we produce normal traffic products.