English 中文
Your Position : Home > News > News Information

Produce Plastic Round Solar Cats Eyes Road Studs

DATE:2020-04-13
Read:
SHARE:
The round solar cats eyes road studs is a very beautiful landscape LED lamp. This is a round plastic box, looks like a plastic flying saucer, very beautiful. The lamp can be 6 LEDs evenly distributed, it can also be 8 LEDs evenly distributed, or can be 10 LEDs evenly distributed.
 

Now let us look at the production process of this solar cats eyes road studs.

1. Select the round plastic shell of the solar cats eyes and test the output voltage of each solar panel.

With its output current, the instrument will be used to test to ensure that the quality of the LED solar panel is good, QC controls the quality, the solar panel and the plastic shell are not scratched, damaged, or deformed, they passes the test.

2.Installing LED lamp beads

Each LED lamp requires a plastic kit. When installing, insert the LED lamp into the plastic kit to ensure the tightness of each LED, so that when the glue is filled, the glue will not enter the interior of the LED lamp beads.

3. Connect all LEDs which inserted into round plastic solar cats eyes road studs

According to the design principle of connecting all LEDs in series , all LEDs are connected together. In this step, all LEDs must be soldered firmly to ensure that the plastic solar cats eyes road studs work longer in the future.
 
Plastic Round Solar Cats Eyes Road Studs
 


4. Insert the drive circuit of the round plastic solar road stud into the entire housing
 

The entire driving circuit is divided into a positive electrode and a negative electrode. The positive electrode of the LED is connected to the positive electrode of the driving circuit. The negative electrode of the LED is connected to the negative electrode of the driving circuit.

5. Installing the battery on the round plastic solar solar cats eyes road studs

After completing all procedures, installing the battery to the bottom of solar cats eyes road studs. Although it is a nickel-metal hydride battery, the battery is also a dangerous product. This battery can only be installed in the last step. After installing the battery, it will begin to test the function of the entire solar cats eyes road studs.
 

6. Fill the semi-finished products of solar cat eyes road studs with glue

Test the solar road studs made in the above steps to ensure that the battery is filled after the charging and discharging tests are passed. The potting compound uses completely sealed glue, its delay time is very good, and its pressure resistance is also very good.

solar road stud
 


7. Check the finished solar cats eyes road studs

After the filled glue dries out, QC inspection is performed to check the electrical performance and appearance. Charging and discharging will be checked again, and it will be placed in a dust-free space to enter the charging and discharging time every half a month. After half a month, if there is no problem with the product, the solar cats eyes road studs can be basically pack and ship it.

The quality of such solar cats eyes road studs will be very good and worth buying by customers.
 

 
 
Back