English 中文
Your Position : Home > News > News Information

What Is Active Solar Road Stud?

DATE:2019-10-30
Read:
SHARE:

The traditional solar road stud are self-contained system, which can achieve photoelectric conversion, electric energy storage and led flicker. However, because there are solar panels, circuits and batteries in the solar road stud, its compressive value is difficult to meet the requirements of the relevant technical standards of the Ministry of transport, and the battery can not be replaced, and the life of the solar road stud is limited.

active road stud

The active road stud is to gather the solar panel, battery and control circuit in each solar road stud into a control box. The effective control distance of a control system can reach 500 meters. The solar road stud only keeps the LED lampshade and a simple voltage stabilizing circuit for display, so that the interior of the solar road stud is very simple, and the compression value can also be very high, reaching or exceeding 16 tons.

Another advantage of the active road stud is that the solar panel is the only one, which is very suitable for use on roads with twists and turns in mountainous areas, lush trees and insufficient sunlight on the ground. When applied, just place a solar panel in a sunny place. But the traditional solar road stud requires that every road stud area must have sufficient sunlight, which is unrealistic.Therefore, in the solar road stud industry, the active road stud is an important technical way for development. It must be emphasized that as for the active road studs used in the road, the shell is preferably made of cast aluminum.

Although the performance of the active road stud is excellent, it needs to be slotted, buried and potted in the road surface during the installation, which requires a large amount of work and a high quality of the project.The tunnel wired road stud is actually one of the active road stud. The difference is that its energy supply is not solar energy, but is alternating current in the tunnel (because there is no solar energy in the tunnel).
Wireless synchronous flashing solar road stud

Wireless synchronous flashing solar road stud also is the improvement and innovation of the active road road stud, which is characterized by not only realizing the step flashing, but also not damaging the road surface.Nokin Traffic also have this type wireless synchronous flashing solar road stud,any requirement,welcome to send us email to get more information!

 

Back