Road Safety Products Our Company specializes in manufacturing Road Safety Products like Road Studs, Blinkers, and solar road stud. Our Road Safety Products are used throughout the world due to their unmatched quality and safe usage.
We bring you this solution for lighting up driveways, pathways and roads for your home, office, hotels, farms and factories and roads. These die cast strong aluminium studs come with efficient solar panels and batteries for charging during daytime to light up automatically at night. The batteries store enough power to last 10 hours of night lighting. These solar studs can be easily installed with groundnuts for permanent fitting and by pegs for temporary fitting. at desired places on your roads These solar LED road studs are naturally charged by the sun. As soon as it starts getting dark the LED lights in the stud come on automatically each night for up to 10 hours. They have been specifically designed for road safety in mind and can help to prevent serious accidents and emit rather than reflect light. Solar LED Road Studs are also known as solar raised pavement markers, solar reflective lane markers and solar warning devices. Place to Install: Guidance lines, traffic islands, roundabouts and mountain roads. Dangerous blind corners and sharp-curves, black spots and poorly lit areas. Taxiways at airports, bike and pedestrian lanes, aboard ships and watercraft. Areas with unpredictable weather conditions (coastal roads, foggy areas, wet and rainy regions, etc.). Joint intersections, on and off ramps, center lines and dividers, entrance warnings, carpool lanes, bridges, cross and side walks Entertainment areas, parking lots, hotel entrances and gas stations etc. They can even be seen from a distance of up to 545 yards!!! They are cost effective, easy to install and require no maintenance.”
NOKIN aluminum solar road stud lights are installed on the steps of the villa. NOKIN’s solar road stud lights D1 are cheap and easy to install. They can be fixed with epoxy glue or two screws. There are 5 colors to choose from.
10.4 cm long, 7 cm wide and 3.4 cm high LED road stud light looks like a palm sized spike, but LED road stud light has the advantages of high and low temperature resistance, impact resistance and rolling resistance, long service life and basically no maintenance.
Built-in 6pcs high quality LED light beads, NOKIN LED road stud light provide super bright white light for your. NOKIN LED road stud ligh Not only can be used as a warning step lights and guiding lights, but also can be used as decoration lights to your house.
NOKIN LED road stud light is a practical road safety equipment used in urban or interurban roads, shopping centers, car parking areas, residental site parking, public and private institutions parking lots etc. LED road stud light is used as lane regulator and road seperator.
Because the led road stud is buried in the ground, its volume can be relatively large, and the led road stud light can achieve large charging capacity and storage capacity. However, due to the short research time, this kind of embedded solar road stud is in the primary application stage.
The NOKIN embedded LED road stud light uses the streamline design, and the LED light can be selected for continuous lighting and frequency flashing. The flashing frequency of LED road stud light can be selected, and the LED display colors are white, yellow, red, green and blue, which can be flexibly selected according to the use scene.
The Hot sale solar led road stud group accessories adopt the leading lamp sets exported to other countries, which have the characteristics of durability, high brightness, good effect and low energy consumption, which can ensure the brightness and reduce energy consumption.
NOKIN can provide a variety of technology and types of solar road marker according to the specific situation of the road. Customers can also choose customized solar road marker according to actual needs. NOKIN has more than 18 years of experience in the production of solar road markers.
The NOKIN PC LED road stud light uses single crystal solar cell as the power source, solar led road stud uses the sunlight energy to transform into the electric energy, the livestock battery has Ni-MH and farad capacitor to choose from. High brightness LED is used as light source, energy saving and environmental protection
Another new feature of Plastic solar led road stud is the synchronous chip in the road stud. Plastic solar led road stud can synchronize the flicker frequency of the same road stud within tens of meters around to ensure that all the road studs light up synchronously and make the lane clearer at night.
At the same time, NOKIN solar led road stud have good waterproof and dustproof effect, and the protection grade can reach IP68. The solar led road stud adopts aluminum shell design which give the product strong impact resistance and durable.
The appearance of NOKIN LED road stud light is beautiful, which can be used for road guidance device, as well as garden, park and road edge decoration. The LED light frequency of the solar road studLED road stud light can be selected, so the use scene of the road stud can be flexibly selected.
Among NOKIN solar led road studs, the beautiful embedded solar led road stud only protrudes a few millimeters from the road. The embedded solar led road stud can not only be used as a road light guide device, but also as a decorative light.
With the newest solar panel, NOKIN road stud light will absorb sunlight more efficiently. LED road stud light takes only 4 hours to charge in full sunlight, which is 30%-50% shorter than similar products. Longer lifespan – The upgraded solar panel lasts 2-3 years longer than conventional ones, durable and reliable.
NOKIN LED road stud light WEATHERPROOF IP68, the highest grade of dust-resistant and water-resistant. LED road stud light With aluminum alloy casing, foreign matter and dust can not enter in the LED road stud light, and even if immersed in water, it will not be damaged. Please be assured to use it outdoors without worrying about any bad weather such as rain and snow.
The general power of the Plastic LED road stud light is small, and the typical lamp is round and square. Solar panels made of monocrystalline silicon or polycrystalline silicon, LED lamp beads, batteries, etc.
The display device of the Aluminum solar led road stud is super bright LED, Aluminum solar led road stud with 3 lamp beads on one side or on both sides. The visible distance is over 800m. The working environment is – 40 ¡æ ¡« + 70 ¡æ. The static compression capacity is more than 40 tons, and the waterproof grade meets the IP68 standard
NOKIN Plastic LED road stud light as the energy, is mainly composed of charging, use at night during the day, without complex and expensive pipeline laid, solar LED road stud light can be arbitrary adjust the layout of the lamps and lanterns, safety and energy saving pollution-free, charging and the on/off process adopts intelligent control, electric automatic switch, without manual operation, a stable, save electricity, maintenance free.
NOKIN LED road stud light provides effective visibility by projecting the vehicle headlight with the glass bead lens. LED road stud light guide the drivers during night and rough weather conditions.
NOKIN solar led road stud holder is made of die-casting aluminum and the surface is sprayed with plastic. The solar led road stud is not only light in weight and small in thickness, but also waterproof, strong shock resistant and corrosion resistant. This is the essential quality of high quality solar led road stud.
The normal service life of NOKIN solar led road stud battery is three years. In addition, NOKIN solar led road stud is also very convenient to install, in the construction time and occupation of road space is far better than the road separation fence, the damage to the road is very small, is one tenth of the isolation fence.
There are two kinds of solar LED road stud light: buried type and raised type. At present, solar LED road stud light is mainly installed on the ground. Due to the requirements for the height of the ground protrusion, the size of the LED road stud light is also limited, especially the height of the road stud is strictly limited.
LED road stud light road stud is mainly intended to remind the driver to ensure a safe driving, especially in the condition of rainy days or dark night, where marking lines are submerged by rain and fail to do their job. Since the height is usually about 2 cm, LED road stud light reflector is still visible to drivers despite the rain water accumulated on the road surface.
NOKIN solar led road stud play an important role in warning the driver to stay cool when driving by producing bumpy effect for the driver when the vehicle run over solar led road studm.
NOKIN solar led road stud are equipped with solar panels, synchronous chips, exit light sets and other accessories, with a number of new functions. The solar panel in the solar led road stud absorbs sunlight during the day and converts the solar energy into electric energy storage.
LED road stud light for securing safe road environment at night or in bad weather condition with high luminance LED lights ON by solar energy without electricity.
NOKIN solar led road stud light emission frequency is optional, flexible choice of use scene. The base of solar led road stud light is made of die-cast aluminum material, and the surface is sprayed with plastic technology, which has the advantages of light weight, waterproof, strong shock resistance and corrosion resistance.
NOKIN Hot sale LED road stud light is made of thickened PC material, which has excellent impact strength, UV resistance, thermal stability and flame retardancy. The LED road stud light is powered by solar energy, and can work continuously for more than 48 hours with one charge. And the use of imported solar panels, service life up to 3 ~ 5 years.
NOKIN PC solar LED road stud light using streamlined design, beautiful appearance. PC solar LED road stud light can be used for road induction, but also for decorative purposes. Imagine that after a long drive, when you are tired and irritable, you suddenly see a PC solar LED road stud light flashing at a certain frequency. It will definitely make you feel better and improve your ability to focus on the road.
NOKIN Plastic solar led road stud is very practical when you want to light a road marking. During the day, the battery is charged by the solar panel on the top. During the night, the LEDs will light for a period of 10 hours. Because the LED lighting works on solar power, this solar led road stud is completely autonomous. With a compression resistance of 10 KN, solar led road stud light are also very robust.
NOKIN LED road stud light Equipped with a 600mAh large capacity battery, after being fully charged, NOKIN LED road stud light will last lighting up to 72 hours from dusk to dawn. Provide whole night illumination to your deck, dock, walkway, garden, stair, pathway, yard, etc.
In terms of the appearance of led road stud lights, there may be these standards and requirements. For example, the surface coating of led road stud light should be uniform, and should not blister, crack, scratch, fall off and wear. The lens of the led road stud light should be clear and transparent without impurities, scratches and pollution.
NOKIN solar led road stud can be used for road, path, deck, dock, driveway, garden, walkway, sidewalk, backyard etc. This solar led road stud can be quickly installed in any ground where it can absorb the sun light directly. With its wireless design, you can fix it with screws or glue, we have prepared installing screws for you to fix this pathway light on the road, so You do not need to buy new screws.
The installation and use of LED road stud light to a certain extent avoid the interference of rain and fog on safe driving. The high-intensity light penetrates through the rain and fog, highlights the outline of the bridge deck channel, LED road stud light points out the driving direction for the driver safely and effectively, and creates a safe traffic environment.
Illuminate your driveway, path, dock, or lawn area with NOKIN PC LED road stud light. Lighting up your area is always a safe bet and what’s better than saving on energy while you do it? With no wiring necessary, PC LED road stud light lights are easy to install.
The solar led road stud is a solar powered delineator with an omnidirectional LED producing 360¡ã visibility. Initially designed for cycle track and pathway installations as an economical alternative to hard wiring, solar led road stud are also numerous other applications where the product can be used such as driveways, marinas and campsites
NOKIN LED road stud light are a low-cost, self-contained, solar-rechargeable, LED illuminated marker. LED road stud light can be used to reduce speed, signal driver attention to common features, hazards, and dangerous bends on our roads.
NOKIN solar led road stud can be used on sharp corners, dangerous bends, pedestrian crossings/refuges, concrete traffic islands, median/dividing strips, bike lanes, speed humps, merging lanes, roundabouts, guard rails, narrow bridges ¡®KEEP CLEAR¡¯ intersections.
The practice has proved that the solar led road stud light plays an important role in drawing the road outline, led road stud light guiding the drivers sight and eliminating the hidden danger in the rain and fog weather and in the curve.In the current national highway safety guarantee project, a variety of more scientific and technological traffic safety facilities have been widely used, which play their important role in improving the safety of highway traffic and reducing the occurrence of traffic accidents.
The NOKIN solar LED road studs, LED illuminated raised pavement solar marker is a low cost, maintenance-free and effective alternative to overhead street lighting. Powered by a very efficient and long life super capacitor, solar LED road stud lights provide superior road/ path visibility while avoiding the problems associated with battery-powered markers.
NOKIN solar led road stud light provide a significant increase in the effective warning distance for drivers. Flashing models solar led road stud light flag driver attention and can help reduce speed.
PC solar led road stud are now widely accepted as essential for controlling traffic flow in a wide number of applications. In practice, such systems operate well above the road surface, make the message to a driver clear and univocal thereby improving the outturn of the road while enhancing safety aspects