solar cat eyes road stud

With the continuous progress of the times, solar studs have become more and more popular in life and have been widely used in road construction and transportation. It conforms to today’s green and environmentally friendly concepts and reduces environmental pollution. The government and the country have begun to pay attention to new technologies. Energy development, taking the road of sustainable development.

Nokin Solar Road Spike is a compact solar LED road stud with built-in high-efficiency solar panels. It is available in four different colors, red, green, yellow, blue, and white. Unique in design, this solar road stud is the perfect sign light. With a waterproof rating of IP68 and a load capacity of over 20 tons, the solar road spikes are very safe when walking and driving.

The range of applications for solar road lights extends from simple obstacle marking to complex optical road guidance tasks. Enormous autonomy can be achieved through the conversion of solar energy. Expensive and complex wiring disappears, leaving a clear and defined path.

The background of the generation of solar road studs is that the focus of highway construction is gradually shifting to mountainous areas and mountainous areas where economic construction is relatively lagging behind. On highways in mountainous areas, wind speed is more obviously affected by mountains and valleys.

NOKIN Solar Road Stud does not have the same dependency. They don’t rely on the vehicle’s headlight beams at all. Instead, they actively provide light output directly within the driver’s natural line of sight through high-brightness LEDs in the studs. These LED spikes are powered by solar energy captured from natural sunlight by built-in solar panels and stored in the spike’s internal battery. Thanks to this active light output, they provide up to 10 times better visibility of the road layout ahead compared to conventional reflective road markings, enabling driver visibility up to 900m.

Solar road studs provide effective night guidance during night hours and in adverse weather conditions. The studs are easily visible and can be heard and felt due to the rumble when a vehicle crosses over them. Available in different aluminum and rigid plastic sizes for both centre division and to delineate edges, these studs are highly impact proof and known for reflectivity.

Because the tiny glass beads in thermoplastic are not reflective in rain, they enhance the reflection of road markings on rainy nights.
In addition to road markings at night, guide traffic on highways or curves to provide a safer visual environment. Tiny glass beads in thermoplastics tend to fall off; therefore, the reflection of road markings is greatly reduced. Collision action alerts drivers when they change lanes
Solar road studs work through retroreflection. This is important in traffic, as reflectors reflect the vehicle’s light back to road users from all angles, guiding or warning them in various traffic situations.

We also have many kinds of plastic road stud and other aluminium road stud,solor road stud,glass road stud and ceramic road stud.Road lighting is a crucial part of road design, and designers need to ensure the roadway is adequately lit to provide illumination of the road ahead and increased reaction time . Solar road studs offer numerous benefi ts, as mentioned in this article. Solar road studs should be of a high quality, have a high compression resistance and wide temperature range, and should be correctly suited to their application, be it on the road edge, curves, intersections, pedestrian crossings . The road sector should aspire to apply automatic integration of safety measures, as is standard in aircraft safety. Hence, road studs should be incorporated into designs as an additional safety measure. Installing and upgrading roads with the use of LED lighting and solar road studs or hardwired studs will make a vital contribution to the reduction in road accidents and the unacceptable burden they impose on society.

Solar road studs are one of the most important devices to keep cars from veering off the road or driveway and make our roads safer. Solar road studs reflect light from car headlights, allowing drivers to observe the curves and corners of the road from a distance. Even in the dark, the driver can easily see the route, end point and corner of the road, and judge where to turn and which lane of the road to take, so as to drive safely. This makes the stud very useful on roads with low light. They provide effective nighttime guidance even in adverse weather conditions.

The purpose of the road studs is to enable the drivers to completely judge the form of the road. In the night time, the driver is unable to see the road alignments, ends, and corners of the road. Because of the lack of road lights, it becomes necessary to install the road studs

Solar road studs are charged in the Daytime, it will automatically light at night, solar road stud is used in the side of the road, village, Park, Garden, or seaport. Two work modes and 5 colors for your choice. Your own design is appreciated; NOKIN can make the approval sample according to your golden sample.

NOKIN aluminum solar road stud lights are installed on the steps of the villa. NOKIN’s solar road stud lights D1 are cheap and easy to install. They can be fixed with epoxy glue or two screws. There are 5 colors to choose from.

When night falls, it is not just a high-hanging street lamp that can bring a brightening effect to the city. The emergence of solar road studs that flash and blink can not only add light to the road section but more importantly, solar road studs can isolate the road surface. Standardize the role of drivers at night.

The spacing between each aluminum solar road stud lights depends on the lane. For example, in dangerous lanes, the road stud lights are closer together compared to the highway. It better attracts the driver’s attention and thus improves safety.

Depending on the structure of the body, we can have three types of solar road stud lights. The first one is the classic solar road stud light, as shown in the picture above. When installed, they provide a small height on the road. Screws are used to fix this type to the surface of the path.

Aluminum Solar LED road studs with reflectors are common. Hybrids have the best of both worlds. Now, even if any electronic component fails, the device will continue to work to some extent due to the presence of the reflector.

A single charge of solar road stud marker can be used for more than 6 days. So when the sun is low, especially in winter, the batteries have enough power to light up the LEDs for many nights

A common driving problem that leads to fatal accidents is sudden glare due to oncoming traffic. This is because the beam of light from the approaching vehicle flashes directly into your eyes. It temporarily blinds you.
Solar road stud light can also help alleviate this problem. When road markings are self-luminous, the need for bright headlights is optional and unnecessary.

Solar road stud markers are promising devices in areas where traffic lights and street lights are out of reach. This is true in remote and rural areas.
Unlike cat eyes, solar road stud markers require maintenance and replacement parts after a few years because the electrical components, especially the batteries, have a limited life span.

-NOKIN Plastic Solar Raised Pavement Marker Q7 is suitable for roadside, truck, ship, train.
-The top solar panel of the solar raised pavement marker and side LED lights allow for original positions and are ideal for warning the presence of edges, restrictions, and lateral areas.
-Can order intermittent (flashing) or steady light (continuous light all night).

Plastic solar road spike equipped with a rechargeable battery, it can emit light continuously for up to 72 hours, or the flash can be used for more than 200 hours after only 6 hours of charging. Advantageously replace the traditional pushpin (called cat’s eye), NOKIN solar road spike stud can easy fixation through bi-component Polyester Adhesive.

Plastic Solar Cat Eyes, with LED lighting system, is supported by solar panels and reflective elements to improve visibility during the day and night. A device used to distinguish singularities on the road.
Plastic Solar Cat Eyes Application: the vertical or horizontal part of the road; for example: the division of the road, the starting point of the bridge, the gate, the crosswalk, the toll station, etc. The application surface must be well structured and clean.

Solar raised pavement markers should be used whenever safety signs and traffic guidance are needed: streets, avenues, roads, highways, parking lots, etc…
Solar raised pavement markers are safer than ordinary pavement markers, they are more resistant and different from normal signs.

Solar Deck Light is ideal for illuminating paths, decks, docks, piers, boats, driveways, stairs, sidewalks, parking lots and parking lots, plastic solar road markers are ideal for areas where traditional power sources are not available. Traffic signals can be used at intersections, on and off ramps, centerlines and dividers, entrance warnings, carpool lanes, bridges, crosswalks and sidewalks.

Plastic Solar Road Pavement Markers
-Plastic road stud with autonomous solar LED.
-Very suitable for delimiting roads, routes, highway exits and building entrances.
-Plastic Solar Road Pavement Markers can be used independently for 120 hours after 8 hours of solar charging.
-Plastic Solar Road Pavement Markers Can work normally for more than 3 years.
-Energy saving and respect for the environment.
-Supports a weight of more than 20 tons.
-Waterproof and unbreakable: solar panels, electronic components and optical components are installed inside.

NOKIN is the creator of the NOKIN Plastic Solar Road Stud, designed and developed to harness solar energy during the day and provide drivers with superior lane guidance and early warning at night. NOKIN solar road stud include active solar road studs (surface and flush) and smart road studs that are hardwired and can be correlated with other technologies.

Traditional cat eye road studs have been around for decades, and in that time their performance has barely changed. They still rely on the effectiveness of the vehicle’s headlight beam to provide enough light at the correct angle to reflect some of the light back to the driver to depict the road ahead. At best, the headlight beam typically extends to about 90m.

Solar Raised Pavement Marker ensure your employees, visitors, contractors and members of the public safe in your workplace or near public access. Smart, safe, and sustainable surface mounted Solar Raised Pavement Marker improve night visibility and provide clearly visible traffic guidance in all weather conditions. Continuous glow for 50 hours, visibility of 800 m, color: red, white, yellow, green, blue.

The NOKIN Aluminum Solar Road Marker is visible in night and rainy conditions. Tough, impact resistant housing and wear resistant reflectors ensure lasting performance and durability. NOKIN specializes in providing solar road stud markers, which are LED scintillation equipment for roads that provide direction indication, improve road safety and reduce accidents.

After the Solar Road Stud Light installation, with a knife to scrape clean the spill glue , clean up.after the installation of Solar Road Stud Light, then linked to the pre-arranged main line, connect the power supply to test whether there is a short circuit,if no problem can be connected to the main power.

How to install Solar Road Pavement Markers? use epoxy. The ratio of epoxy glue A and B 1: 0.7, and then add 15% -30% of cement as a filler (not to stir a lot of glue, enough to stick 50-70 PCS Solar Road Pavement Markers for one staff). Colloid to stir, (electric drill with a mixer) the same color. Each Wired Solar Road Pavement Markers requires about 30-40 grams of glue.

Technical Sheet of WiredSolar Raised Pavement Marker. when install the Solar Raised Pavement Marker or wired road stud. Do not touch the LED Light near the hand, avoid make glue to the shell, affecting the luminous effect! Water, damp, oil are Prohibited to install Wired Road Stud (easy to fall off). Remove the road cone after 4 hours of installation.

NOKIN aluminum solar road stud A6-1 with 30ton compression resistance. Larger solar charging area. Anti-impact and IP68 design for reflector. Before installation, solar road studs shall be charged under sunlight for 1 hr, to check the solar road studs can work normally. Small and economy aluminum model, with two shanks, without releasing on road. aluminium alloy+Polycarbonate+epoxy fille

NOKIN Aluminum Solar Raised Pavement Marker Installation Steps. Firstly, the ruler should be used to determine the installation position. The height should be in accordance with the design of the drawing to ensure that the vertical direction is in a straight line and the horizontal alignment is right and left.

High quality Aluminum Solar Cat Eyes application at Road side, motorway, deck light, yard, packing lot, garden, ect. Aluminum Solar Cat Eyes size is L125mm*W107mm*H26+50mm. all NOKIN solar cat eye road stud with CE;ROHS;IP68;SGS Certificate. Warranty is 1 year. Life span is 3years for NI-MH battery.This solar cat eye A6-1 Load capacity is more than 30 tons, can be installed in the middle of the road.

NOKIN Solar road markers with spike is good quality and hot sale in the whole world. Working hours for blinking is 140hours for NI-MH battery, 130hours for lithum battery, 30hours for super capacitor after fully charged. Constant:40hours for NI-MH battery; 35hours for lithum battery; 15hours for super capacitor after fully charged.Working model is blinking or constant(charged at daytime, working automatically at night). NOKIN Solar road markers can work whole night in the dark places

NOKIN Solar road marker working temperature is -20¡ãC-80¡ãC. Life time is over 5years. Resistance is 300KN. Size is L125mm*W107mm*H26+50mm with shank or without shank, Water proof is IP68. warm white is hot sale in the world. load capacity is over 30 tons, Solar road marker can be installed at the parking lot, few cars can pass throught.

Solar Road Pavement Markers are flashing solar cell powered LED maintenance-free lighting devices used in road construction to delineate road edges and centrelines. Embedded in the road surface, Solar Road Pavement Markers are an electronic improvement on the traditional cat’s eyes in that they may give drivers more than a thirty-second reaction window compared with about 3 seconds for conventional reflective devices. The intense brightness of the LEDs makes them easily visible at distances of about 900 m under favourable conditions.

Solar road studs are more visible from the front road layout than forward reflective road nails. All night, reliable all year, a longer service life than traditional road stud, easy operation, and excellent vision even in harsh weather conditions. On wet roads, solar road studs can reduce nighttime traffic accidents by more than 70 percent, enhance the driving experience, and make drivers feel safer and better able to travel at night.

The surface of the installation location of Solar LED Road Stud Light to be cleaned, with a blade about 30-40 grams of glue, smear on the back of the Solar LED Road Stud Light, firstly take the Solar LED Road Stud Light through the cable channel cable trench wall (pre-drilled trunking), set to be good Position, fitted with self-tapping, with a Phillips screwdriver on both sides can be tightened at the same time.

NOKIN Solar Road Pavement Markers A6-1 Material is Aluminum+PC. Power supply is Monocrystalline solar panel 2.5V/120MA for NI-MH. Battery is NI-MH 1.2V/ 600mah(high temperature resistance); Lens is PC. Solar Road Pavement Markers LED IS Ultra bright diameter 5mm(6pcs). LED color is Red,Yellow,Green,Blue,White. Working model is Blinking or constant(charged at daytime, working automatically at night). Working hours is (1).Blinking: 140hours; Constant: 40hours for NI-MH battery. Visual distance is over 800m. Water proof is IP68. Resistance is 30T.

These LED solar road markers are powered by solar captured with built – in solar panels from natural sunlight and stored in internal cells of the solar road markers. The result of this active light output is that they provide 10 times forward road layout visibility compared to traditional regression reflective road markers, giving driver visibility up to 900m.

Originally designed for road use, its low profile makes NOKIN Solar Studs Light very suitable for various other applications such as sidewalks and bicycle lanes, crosswalk, level crossings and railway platforms. Below on the NOKIN Solar Studs Light specification sheet for more details.

Under harsh conditions (rainy days, foggy days or surface spray), traditional reflective road studs and road markings are not noticeable, but NOKIN solar road studs lights continue to shine brightly and safely guide you. This provides ample time to obtain and process information about the possible dangers ahead, and to adjust the driving mode accordingly without applying the brakes.

Aluminum Solar Cat Eyes have been widely used worldwide for edge demarcation and have been shown to reduce nighttime road accidents at the UK installation sites by more than 70 percent. Aluminum Solar Cat Eyes are perfect for where profile enhancement is required, but may not be flush.

Solar road stud lights have been fully approved by transport uk. Please refer to our installation instructions for step-by-step guidance on how to install solar road stud lights. With just a few hours of charging, the solar road stud lights can provide enough battery power to keep it running on the last day – enough to ensure that the road stud is up and running all year round, regardless of the weather or anywhere in the world.

The NOKIN active solar road markers do not have the same dependence. Solar road markers do not rely on the vehicle headlights at all. Instead, they actively deliver light output from the high brightness LED in the stud directly into the driver’s natural sight.

NOKIN solar road studs are more robust than conventional road studs, meaning solar road stud have lower total life costs and longer service life than reflective road studs.

Solar Road stud have proved to play a great role in road safety, reducing nighttime road accidents by more than 70% and treating us as reality. reflective drivers at 100 km / h distance 90m. This provides about 3.2 seconds to respond to changes in the road in front. Active solar road stud provide up to 900m views and the driver receives more than 30 seconds.

Why choose Solar Road Stud instead of solid glass road stud?
Solar Road Stud can be seen from further distance, which may be necessary in some traffic situations. Furthermore, since NOKIN Solar Road Stud produce their own light, Solar Road Stud can be used in areas without any street light.

NOKIN Solar Cat Eyes play an important role in sustainable and safe infrastructure. As the need for street lighting becomes less and less, high brightness led Solar Cat Eyes can greatly reduce carbon dioxide emissions.

NOKIN Solar Road Marker Installation Steps.
Firstly, the ruler should be used to determine the installation position. The height should be in accordance with the design of the drawing to ensure that the vertical direction is in a straight line and the horizontal alignment is right and left.

How to install Solar Road Pavement Markers?
First, Security Some Traffic Road Cones,construction diversion card 2 sets, baton,every staff with one reflective vest. Before departure everyone must wear reflective vest, to the construction site must be placed good construction signs and road cones. (Workers do: not joking, not slapstick, obey the conductor, 6 hours before the road can not drink), each team with 2-4 safety staff.

Safe infrastructure is of great value to every country. Sustainable and powerful solutions need to ensure social value. The hollow rig installed NOKIN Solar Deck Light and LED road studs are such solutions. NOKIN Solar Deck Light road studs are used in the pavement to guide, warn and organize road users.

Why choose NOKIN Solar Deck Light K1?
The NOKIN Solar Deck Light road stud is a top-notch quality product, reliable and robust.
The NOKIN Solar Deck Light K1 housing is made in one-piece: 100% waterproof and dustproof.
Because of the design of Solar Deck Light, the NOKIN can be driven over by heavy traffic.

How long can Nokin Solar Raised Pavement Marker shine?
After charging, NOKIN Solar Raised Pavement Marker can glow for 200 hours. This ensures the ability to run a full annual cycle even in the dark winter.

NOKIN has been engaged in Solar Raised Pavement Marker for more than 19 years and is considered an expert in the field of Solar Raised Pavement Marker. Back in 2001, NOKIN CEO invented the brand of Solar Raised Pavement Marker used in concrete bricks, called NOKIN Solar road studs.

NOKIN Solar Deck Light?provide significant traffic safety, in densely populated urban areas as well as in rural areas. NOKIN Solar Deck Light led road studs?also ensure maximal traffic safety and visibility. This type of Solar Deck Light is equipped with LED lights, using solar cell technology.

NOKIN Solar Deck Light K1 use Monocrystalline solar panel 2.5V/120MA power supply.NOKIN Solar Deck Light K1 with NI-MH 1.2V/ 600mah(high temperature resistance) battery. PC lens. Ultra bright diameter 5mm(6pcs) .Red,Yellow,Green,Blue,White color led. Blinking or constant(charged at daytime, working automatically at night) working mode. Blinking: 140hours; Constant: 40hours for NI-MH battery. Visual distance: >800m. IP68 waterproof

NOKIN Solar Deck Light K1 for infrastructure applications, typically white or red LED lights are specified. Solar Deck Light K1 as solar road studs on roads are more common for decorative and architectural applications, and other colors are more common, such as green, orange, blue and yellow. Two-way road stud lights work in different settings: they can emit stable light or can flicker. Please feel free to contact us for more information on possibilities.