Solar road stud light for urban road

Solar road studs are easy to use, require no wires to connect, and are very safe to use. At the same time, solar road studs have good waterproof and sun protection functions and can work normally in harsh outdoor environments. Not only does it greatly reduce the risk of short-circuit accidents, but it can also be used normally in any weather.

The core of the solar road spike is its built-in photovoltaic panel. These panels absorb sunlight and convert it into electricity, providing a constant and stable supply of power to the road spike’s light-emitting components. When night falls or the light is weak, the solar road spikes will automatically light up to provide drivers with clear instructions and warnings.

NOKIN LED solar road stud is well received in Philippine Market, especially in Metro Manila, Davao City with a mostly advantaged price over any other China supplier or Philippine supplier. LED Solar road stud is a  protruding sign. It’s self-luminous, supplied by solar panel. Generally used for paving road, used at night or in the rain and fog weather, and sketched the outline of the road, to improve road safety.

The led solar road studs turn on and off automatically – at dusk, the units turn on, and at daylight, they turn off…  The led solar road studs are designed to handle tremendous weight pressure and extreme heat and cold conditions.  The led solar road studs are easily installed and do not require any maintenance or electrical installation.  The units operate at a very low voltage and are sealed making them safe for the public and the installers.

The flush type solar led road stud is produced by mould in one punch, with no need to assemble, which greatly improves its load capability. Solar battery, electronic component and LED indicators are sealed in solar road studs with a special technique, the road stud is strictly waterproof, which can be used on ponding roads in the long run. Upside of the solar road stud is designed with embossed parallel stiffeners which strengthen the stud and protect the solar panel from being crushed by the wheels.

This solar road stud is widely used in the Philippines, the United States, and other countries. Solar road studs not only feature safe property, but also a beautiful appearance. At night, it looks like a necklace to dress up a city and a road. NOKIN also have another type of solar road studs which are very hot sale in the Philippines, it is a solar road stud with 6 safety locks, and the dia is 143mm and 150mm two size, if you interested in this one, pls contact us directly to get more information.

This Internally Illuminated solar road stud has 4 sides emit light, making a stronger visual impact feeling, NOKIN the main product is Solar road stud, solar warning light, solar traffic signs, and reflective road safety product. Now we are developing intelligent traffic safety products. Such as synchronized flashing solar road studs, synchronized flashing solar warning lights, LED road studs to connect with traffic signal lights, solar traffic signs with signals,s and so on.

Shenzhen Nokin Traffic Facilities Co., Ltd. was established in 2001.Our company is located in Shenzhen City, Guangzhou Province, China. NOKIN specializes in the production and development of solar road studs and solar traffic signs in the field of traffic facilities. Our main products include solar road studs, reflective road studs,  solar traffic signs, traffic warning lights, and all kinds of traffic safety and parking safety products.

NOKIN road stud light provides excellent visibility for longer distances and also support wireless control system solutions for applications like changeable lanes, crosswalks, and many more various areas that need specific management. Factory wholesale good quality led aluminum solar road stud light, Embedded in the ground way, fit in the application in a crossing way and heavier duty way, also fit in the lane place.

Solar road stud Light: No need for wires, No need for electrics, No cost! Simple installation, Simple use! It ONLY needs the new, clean, SUN POWER to charge the battery inside and work AUTOMATICALLY! The road stud lights are designed for decoration and illumination. It charges automatically during the daytime and illuminates after dark. With die casting aluminum shell, reflection film, and PC material roof, this road stud light is Ip68 waterproof, anti UV, and anti-yellowing.

The solar road stud lights can help to reduce accidents at regional rail crossings, intersections and provide guidance and hazard warning to drivers in darkness and bad weathers. The road stud light could automatically charge during the day and flash at night automatically. With more than 20 years of factory experience, road stud light produced by our company owns competitive road stud light price and offers more choice to the global traffic road safety market and trustworthy partners all over the world.

Durable white solar road stud light A6-1 is a high-quality weather-resistant product suitable for residential and commercial applications. Strong shock-resistant Die-Cast Aluminium Shell can withstand heavyweight up to 30 tons, external impact and severe weather conditions. A maintenance-free automatic light control system allows operating the light in various scenarios including driveways, highways, car parking lots, traffic lanes and islands, decks, marinas, pathways, etc.

Square solar road stud lights’ unique design also made them very easy to install- solar road stud lights are lightweight and wireless. Moreover, along with the screw sets and the user manual, its design also makes it easier to mount. If you don’t want to screw it, adhesives would provide the same effect. The NOKIN solar road stud lights also come with excellent customer service. It comes with a 1-year warranty and its customer support is always responsive to queries.

Solar Road studs provide effective night guidance during night hours and in adverse weather conditions. The studs are easily visible and can be heard and felt due to the rumble when a vehicle crosses over them. Available in different aluminum and rigid plastic sizes for both centre division and to delineate edges, these studs are highly impact proof and known for reflectivity .

The high-efficiency solar panel enables the NOKIN solar road stud X5 to be powered by solar energy, which can work continuously for more than 48 hours. The service life of the NOKIN solar road stud X5 is up to 5-8 years. Flashing NOKIN solar road stud X5 can display mode flashes 120 times per min or is always on for selection. The solar road stud display colors are white, yellow, red, green, and blue. The display device is super bright LED, with 3 light beads on one side, one side or two sides, more than 800m visible distance.

Solar road stud installation is not a complicated matter, but there are many details that require attention. These details play an important role in ensuring the quality and service life of road studs. Correct installation of motorway solar road studs can ensure the service life of road studs, so as to make full use of their value to road safety.

NOKIN Outdoor Plastic LED road stud for freeway provides long-lasting illumination in one of five colors, perfect for maintaining recreational or emergency traffic and road safety lighting around residential and commercial locations. The LED road stud can be used in sharp turning roads, fog areas (sea roads and airport roads), highways, and roads without street lights.

Solar road stud lights as an energy-efficient universal traffic safety solution. The primary purpose of Bi-Directional Pavement Levelled Stud is to indicate the direction, especially in difficult rainy or foggy conditions and to remind drivers to pay attention to the driving course ahead. It helps dramatically improve safety on roads and reduce the number of traffic accidents.

The installation of an LED blinking solar stud helps the driver to see the signs and markings clearly, especially at night, which has a warning effect. The use of LED blinking solar studs not only has a beautifying effect but also makes urban road traffic signs more international.

Why a Solar Road Stud? Currently, the NOKIN Solar Road Stud have been installed in over 60 location across the UK, Netherlands, France, Australia, and South Africa. Local authorities in places where the solar road studs have been installed reported a 70 percent reduction in accidents occurring at night time. Automotoportal has some statistics on increased road safety in the countries that employ solar road studs.

Owning these advantages, (shock resistance, waterproofing, good ability of sunlight absorption, interlock design, and a strong leg), road stud lights can be installed in any poor places with poor sunlight, rainy days, and a lot of heavy vehicles. Road stud light is widely used in the European Union, the United States, and other countries. Solar road stud lights not only feature a safe property but also with beautiful appearance. At night, it looks like a necklace to dress up a city and a road.

The reflector of raised solar stud A6-1 is embedded from the inner side. The reflector embedded from the inner side, which is lower than the surrounding aluminum and not easily be damaged, reflective sheet inside coated with a layer of film to avoid eroding reflectors. The lifespan of reflectors is extending effectively.

When night coming, when you step on the zebra crossing,the solar road studs under your feet will cast a shining red light, “guarding” the pedestrians safely through the zebra crossing. Solar road studs turned out that the pedestrian crossing thermal induction system was installed on the zebra crossing here to remind motor vehicles to slow down before the zebra crossing.

Led in the solar road studs as the main light source+passive reflective material which can mark the direction of the road more clearly and safely. Compared with the traditional cat¡¯s eye road stud, the solar road stud for motorway will be safe and durable. Even if the solar system fails, passive reflection can guide the driver correctly. The visual distance up to 800meter.

We use die-cast aluminum as the main body of this blinking solar stud, while resisting aging and corrosion, the static compression capacity can reach 20TONS, you can install it in the middle of the road. Adopting a high-temperature-resistant battery that can work 1000 times in cycles, the solar stud can work normally even in harsh environments.

Quality is the cornerstone of NOKIN Traffic. All NOKIN solar road studs and development structures are certified by CE, FCC, RoHS and other comprehensive management systems. NOKIN offers hight quality solar road stud at competitive prices. For free quotations with a proven track record of deadline completion, please call us or email us your details of your enquiry today.

As well as applying quality materials that excel on the solar road stud, NOKIN continually delivers excellent performance in all aspects of business. we are proudly at the forefront of research and development within the highways sector and are therefore assured of the high performance and standard adherence of all our solar road studs.

Because of developed infrastructure, the speed of vehicles is increasing and traffic accidents increasing at the same time. NOKIN proposes the most effective solar road stud light to avoid such accidents. Let’s take a look at countermeasures for the nighttime black spots.

The solar road stud light in the picture is the most widely used and most common type of aluminum solar road stud. Its advantage is that it is cheap and widely used. The solar road stud light has its own reflectors. When the power is insufficient, the reflectors on both sides can still serve as a warning. The disadvantage is that the pressure resistance is not particularly good, and it can only be installed on both sides of the road, not in the center of the road.

The beautiful embedded solar road stud only protrudes a few millimeters from the road. The solar road stud markers can not only be used as a road light guide device, but also as a decorative light. The solar road stud markers uses the streamline design, and the LED light can be selected for continuous lighting and frequency flashing.

The color luminous road stud lights installed on the road are only the size of an adult’s palm, and their full name is solar road studs. The power supply method is monocrystalline silicon solar panels, which can be flashed continuously for 7 days under normal light for 8 hours, and the visible distance is greater than 800 meters. Not only that, solar road stud lights also have a powerful chip brain, the GPS global timing synchronization chip, which can realize the synchronization of all solar road studs.

*Led Road Stud Automatically start working when night falls or bad weather starts.
*These aluminum LED road studs are naturally charged by the sun.
*The Led Road Stud come on automatically every night as soon as it starts to get dark.
*Cost-effective, easy to install and requires absolutely no wires or maintenance.
*Led Road Stud Designed for road safety to help prevent serious accidents and emit rather than reflect light.
*Works for over 24 hours after just a few hours of charging in the sun

Solar road studs provide maximum visibility at night with high-quality LEDs. The solar road studs can be easily mounted to the ground with 2 screws and fixing plugs. The material type of the solar road stud is aluminum and the LED colors are available in yellow, blue, red, white, and green.

NOKIN Led Solar Road Stud, rechargeable, LED lighting, raised road markings are a low cost, maintenance free alternative to elevated street lighting. This Led Solar Road Stud provides excellent road / path visibility while avoiding problems associated with battery supply markers.

Solar road stud is a new type of active luminous warning product for road traffic facilities. Solar road stud uses solar panels as charging components, batteries or capacitors as energy storage components, and uses LEDs in combination with reflectors to emit light. Solar road stud is mainly set on the edge of the road and on the divider of the fast and slow lanes. It is generally used in combination with the marking. Solar road stud can send out warning flashing lights at night to improve the driver’s attention, reduce the possibility of collision and collision of vehicles, and reduce traffic safety accidents.

Solar road stud is an environmentally friendly road stud light. It can absorb sunlight through solar panels during the day to convert solar energy into electrical energy and store it in an energy storage device (battery or capacitor). At night or when the light is dark, solar road studs automatically converts the electrical energy in the energy storage device into light energy through the control of a photoelectric switch. , Through the light-emitting components to emit various colors of light, which can be used on the road to outline the outline of the road to guide the driver in the correct direction

Features of solar cat eyes road studs:
1. Solar cat eyes Easy installation: no need for external power supply, no need to lay lines, convenient and firm.
2. Solar cat eyes Energy saving: low power consumption, solar power supply, low operating cost.
3. Good warning effect: LED adopts imported Taiwan Epistar chip, active light, high brightness, dynamic warning, good warning effect.
4. Stable performance: The use of integrated circuit design, high temperature resistant Ni-MH battery, to ensure the service life and performance of the product.
5. Rugged and durable: the shell is formed by a mold at one time, no combination is required, which effectively improves the compression resistance
6. Long working hours: a full charge can work continuously for more than 120 hours. Under standard light intensity, an 8-hour exposure can continuously support 82 hours.

This Solar Road Stud is one of the most versatile solar spike. It is designed for shirt guardrail, curb top and cow nose, but it works for many other features. They are an excellent Solar Road Stud that can better illuminate your road and help with driveway passage. There’s an attractive half round light on each side. Solar Road Stud Install quickly and provide years of maintenance-free service.

Aluminum Solar Road Stud Can withstand large impact and can resist corrosion for a long time. 20 tons of pressure resistance. Curves smooth without sharp edges are better cushioned by the tire’s compressor. The waterproof grade of Solar Road Stud can reach the industry standard IP68. It can be very effective in keeping water out. Low power consumption, long working hours, and easy installation are the main selling points. Solar Road Studs can be used for more than 60 hours after being fully charged. The normal life cycle lasts 3-5 years. It has been widely used in different road conditions, such as dim sunshine, rainy days, and heavy trucks.

Solar Pavement Leveled Marker automatically open and close — at dusk, the devices open, during the day, they close… Solar Pavement Leveled Markers are designed to handle enormous weight pressures and extremely hot and cold conditions. Solar Pavement Leveled Marker is easy to install and does not require any maintenance or electrical installation. These devices operate at very low voltages and are sealed so they are safe for the public and installers.

Solar Road Stud are self-powered, autonomous devices that are usually installed on the center lines, lane boundaries, and pedestrian crossings of roads, providing clear guidance to drivers and pedestrians at night, on rainy or foggy days. Solar Road Stud charge their rechargeable batteries during the day with a built-in small solar panel module, allowing them to act as an effective safety marker in the dark.

NOKIN Solar Road Stud Used in many countries throughout the world. Councils and governments are improving road safety, the environment and install costs with Solar Powered Road Studs, Delineator and Beacons.

Blinking Solar Studs were developed to improve road safety, but can also be used in many other applications such as agricultural applications and off-grid garden decorative lighting.
Blinking Solar Studs are made of high temperature NiMH cells into the ideal industrial quality solar column lamps.

Welcome to NOKIN solar stud light page where we offer high quality solar stud light that are safer than lane reflectors.
Solar stud light can be used as permanent or temporary lighting equipment for hazards. NOKIN solar stud light can be seen a kilometer away at night, providing ample warning of the impending danger.

Easy to use-NOKIN Underground Solar Road Stud combines safety and convenience. Underground Solar Road Stud is safe enough to travel on any road without touch again. Simply tap the switch to switch between on, off or flash settings. The accompanying 1200mAh Ni-Mh rechargeable battery requires no replacement to power six LED bulbs rated for use over 100,000 hours!

Solar Studs are led maintenance-free lighting devices for flashing solar cell power for road construction that depict road edges and centerlines. Embedded on the road, Solar Studs are electronic improvements to traditional cat’s eyes because they provide the driver with a reaction window of more than 30 seconds, compared with about 3 seconds for conventional reflective devices.

Solar Studs Using the power of the sun is not only good for Earth, but also for your wallet. Solar is an unlimited, free daily resource. The Solar Studs uses polycrystalline solar panels to quickly charge its batteries all day for night use without regularly buying new batteries.

The Solar Studs is placed on the road to mark the edge of the driveway or other section. Near cars can easily see the reflective surface and, if hit, pressure resistance of Solar Studs can prevent it from being damaged.

NOKIN Underground Solar Stud Ligh A10 embedded design, more integrated with the pavement and more conducive to vehicles. Easy snow removal on snow pavement.

Solar Road Stud, also known as solar road markers or solar road reflectors, are a traffic safety warning light with amber, yellow, green, red, blue and white. Solar Road Studs are usually installed along the road or highway surface.Solar Road Stud is used to indicate the direction of the road. Especially in rain and fog weather or curves, it can better mark the road profile and remind the driver of the route ahead. greatly reduce traffic accidents.

Solar Road Stud work for a range of industrial applications such as solar pillar lights on animal grids to warn of upcoming traffic hazards. Solar Road Stud Great for outdoor mining operations, council and improved road lighting, farm lane solar pillar lights, remote summary night lighting and solar warning beacons.

NOKIN Solar Stud Light With a double-sided lighting design, made of reflective materials, die-cast aluminum shells, solar panels, LED, energy storage batteries, and controls. NOKIN Solar Stud Light combines active lighting and passive reflection as signs. LED chips are 4pcs/6pcs optional. It is currently the most mainstream solar stud light solution on the market, used by engineering companies, wholesalers and retailers for decks, highways, crosswalks, and lanes.

The use of Solar Studs reduces the need for headlights and the attendant danger of dazzle oncoming drivers. Solar Studs are also more pronounced in rain and fog conditions because of problems with old-fashioned backward reflectors and road markings. Solar cells charge the battery or capacitor at a sunny time, during which the flashing LEDs are switched off by the light switch.

Solar road stud is an environmentally friendly road stud light. Aluminum Solar Road Stud Light can absorb sunlight through solar panels to convert solar energy into electricity during the day and store it in an energy storage device (battery or capacitor). At night or when the light is dark, it automatically converts the electricity in the energy storage device into light energy through the control of a photoelectric switch. , Through the light-emitting components to emit various colors of light, Aluminum Solar Road Stud Light can be used on the road to outline the outline of the road to guide the driver in the correct direction; it can also be used for decoration in villas or gardens.

Solar Road Stud or lane / road markers are a low cost, independent, solar – rechargeable LED lighting marker. Solar Road Stud can be used to reduce speed, alert drivers to pedestrians, etc. Usually used for pointed corners, dangerous curves, crosswalk / shelters, concrete traffic islands, median / separator, bike lanes, speed bumps, lanes, combined lanes, roundways, guardrails, narrow bridges, intersections, etc. ,

Aluminum Solar Cat Eyes have strong aluminum housing and come with 75 mm long fixed pins. Aluminum Solar Cat Eyes are installed using chemical mortar or weather resistant adhesive to withstand 30 tons of axle weight and can be used in any traffic condition. The housing is fully sealed and provides IP68 waterproof properties, visible in 800 m , available in various colors.

NOKIN Traffic is a reputable organization specializing in the manufacturing and supply of LED Solar Stud Light and other related accessories, in addition we have been committed to reaching new heights in innovative LED Solar Stud Light, leadership and customer satisfaction.

The NOKIN Aluminum Solar Road Marker is visible in night and rainy conditions. Tough, impact resistant housing and wear resistant reflectors ensure lasting performance and durability. NOKIN specializes in providing solar road stud markers, which are LED scintillation equipment for roads that provide direction indication, improve road safety and reduce accidents.

After the Solar Road Stud Light installation, with a knife to scrape clean the spill glue , clean up.after the installation of Solar Road Stud Light, then linked to the pre-arranged main line, connect the power supply to test whether there is a short circuit,if no problem can be connected to the main power.

Solar LED road studs with reflective LED markers, double – sided solar road studs combine independent powerful light sources with traditional reflectivity to provide unparalleled visibility and greatly improving road safety. In addition to being used as road studs, these LED solar road stud markers can also be installed in many other locations to cause attention to hazards and obstacles: sidewalks, zebra crossings, entrances or exits.

How to install Solar Road Pavement Markers? use epoxy. The ratio of epoxy glue A and B 1: 0.7, and then add 15% -30% of cement as a filler (not to stir a lot of glue, enough to stick 50-70 PCS Solar Road Pavement Markers for one staff). Colloid to stir, (electric drill with a mixer) the same color. Each Wired Solar Road Pavement Markers requires about 30-40 grams of glue.

The Yellow LED Solar Cat Eye is a fully solar powered device for road marking. The ultra bright LED used in NOKIN Solar Cat Eye has three LED per side which is suitable for outdoor conditions and no damage when the car passes. The aluminum body of Solar Cat Eye is very durable.

Technical Sheet of WiredSolar Raised Pavement Marker. when install the Solar Raised Pavement Marker or wired road stud. Do not touch the LED Light near the hand, avoid make glue to the shell, affecting the luminous effect! Water, damp, oil are Prohibited to install Wired Road Stud (easy to fall off). Remove the road cone after 4 hours of installation.

NOKIN aluminum solar road stud A6-1 with 30ton compression resistance. Larger solar charging area. Anti-impact and IP68 design for reflector. Before installation, solar road studs shall be charged under sunlight for 1 hr, to check the solar road studs can work normally. Small and economy aluminum model, with two shanks, without releasing on road. aluminium alloy+Polycarbonate+epoxy fille

The Solar Road Stud Light “is simply an” active road stud ” with automatic switching, achieved by combining small solar panels, rechargeable cells and LED drive circuits. Today, road lighting systems have been widely considered essential to control flow in a large number of applications. In practice, such Solar Road Stud Light systems operate well above the pavement and use multiple well known and widely accepted colours where lights have specific directions to make a clear message to the driver, thereby improving road traffic while enhancing safety.

NOKIN Aluminum Solar Raised Pavement Marker Installation Steps. Firstly, the ruler should be used to determine the installation position. The height should be in accordance with the design of the drawing to ensure that the vertical direction is in a straight line and the horizontal alignment is right and left.

NOKIN Traffic is one of the world’s leading premium brands for Solar Raised Pavement Marker. Furthermore, we believe that the industry standards for Solar Raised Pavement Marker must ultimately bring real, tangible benefits to consumers.

Solar Road Stud are dusk to dawn LED lights for up to 5 days at a charge. Because Solar Road Stud do not use conventional energy, but are powered by solar power, they must be used outdoors (in daylight) to build charges. Solar Road Stud provides flashing warning lights to warn drivers to pay more attention to the upcoming curve, middle or crosswalk. NOKIN solar road studs are manufactured according to safety standards with high visibility and effectively reduce the risk of traffic accidents. Safety first!

High quality Aluminum Solar Cat Eyes application at Road side, motorway, deck light, yard, packing lot, garden, ect. Aluminum Solar Cat Eyes size is L125mm*W107mm*H26+50mm. all NOKIN solar cat eye road stud with CE;ROHS;IP68;SGS Certificate. Warranty is 1 year. Life span is 3years for NI-MH battery.This solar cat eye A6-1 Load capacity is more than 30 tons, can be installed in the middle of the road.

Solar Raised Pavement Marker neatly installed on sidewalks and bike lane lights provide trip – free overnight lighting, overnight dusk to dawn lighting will clearly define the sidewalk or bike lane. This premium Solar Raised Pavement Marker is at the forefront of solar technology and offers super capacitors instead of batteries for power storage to extend service life to more than 8 years. A choice of colors as well as static or flashing modes.

NOKIN Solar road markers with spike is good quality and hot sale in the whole world. Working hours for blinking is 140hours for NI-MH battery, 130hours for lithum battery, 30hours for super capacitor after fully charged. Constant:40hours for NI-MH battery; 35hours for lithum battery; 15hours for super capacitor after fully charged.Working model is blinking or constant(charged at daytime, working automatically at night). NOKIN Solar road markers can work whole night in the dark places

NOKIN Solar road marker working temperature is -20¡ãC-80¡ãC. Life time is over 5years. Resistance is 300KN. Size is L125mm*W107mm*H26+50mm with shank or without shank, Water proof is IP68. warm white is hot sale in the world. load capacity is over 30 tons, Solar road marker can be installed at the parking lot, few cars can pass throught.

Solar Cat Eyes can help reduce regional rail intersections, accidents at intersections, and provide driver guidance and hazard warning in dark and bad weather. Aluminum Solar Cat Eyes help reduce environmental impact and cost saving. Apply special reflective material to the gap between LED. Even if the LED indicators are not illuminate, the vehicle will illuminate road studs with headlights.

Solar Road Pavement Markers are flashing solar cell powered LED maintenance-free lighting devices used in road construction to delineate road edges and centrelines. Embedded in the road surface, Solar Road Pavement Markers are an electronic improvement on the traditional cat’s eyes in that they may give drivers more than a thirty-second reaction window compared with about 3 seconds for conventional reflective devices. The intense brightness of the LEDs makes them easily visible at distances of about 900 m under favourable conditions.

These Solar Road Stud are like reflective studs, but power embedded LED lamps. Adding embedded LED lights to each stud benefits traditional reflectors. Since reaction time is mainly based on vision, Solar Road Stud provide drivers for up to 30 seconds and 3.2 seconds. Drivers with ten times open horizons can reduce the accident rate by up to 70% .

NOKIN Aluminum Solar Road Spike is divided into three parts design, fixing aluminum base to substrate, removable epoxy filled with interior components and non – slip polycarbonate lens. The Aluminum Solar Road Spike has IP68( diving) waterproof rating, weighs over 30 tons, ideal for road installation.

The surface of the installation location of Solar LED Road Stud Light to be cleaned, with a blade about 30-40 grams of glue, smear on the back of the Solar LED Road Stud Light, firstly take the Solar LED Road Stud Light through the cable channel cable trench wall (pre-drilled trunking), set to be good Position, fitted with self-tapping, with a Phillips screwdriver on both sides can be tightened at the same time.

NOKIN Solar Road Pavement Markers A6-1 Material is Aluminum+PC. Power supply is Monocrystalline solar panel 2.5V/120MA for NI-MH. Battery is NI-MH 1.2V/ 600mah(high temperature resistance); Lens is PC. Solar Road Pavement Markers LED IS Ultra bright diameter 5mm(6pcs). LED color is Red,Yellow,Green,Blue,White. Working model is Blinking or constant(charged at daytime, working automatically at night). Working hours is (1).Blinking: 140hours; Constant: 40hours for NI-MH battery. Visual distance is over 800m. Water proof is IP68. Resistance is 30T.

When installing solar road studs, we need to clean the road before mixing epoxy glue, and then spread evenly on the back of the solar road stud. Press the solar road stud firmly on the road. Wait about 4 hours for the glue to dry. The car can pass. The driver can see it from 500 metres away.

Solar road studs without shank are more stable, pins are not pinned, and the entire product is glued to the ground. The top of a solar road stud with feet is comparable to a stud fixed to the ground with several small screws. One of the most common problems with fixed solar road stud is the separation of the upper and lower parts. As the car passed, some screws were too thin and too small, the car was pressed several times and the roof flew down.

Why choose a flat bottom solar road stud without shank? The foot-mounted solar road stud is divided into two parts. The lower part is a foot base and the upper part is a solar panel, LED and lampshade. The upper and lower parts are connected by multiple screws. At present, most solar road studs with feet use this structure.

When the raised solar road stud is mounted on the line. Markers are also resin materials that attach themselves to the ground and have limited connectivity to the ground. If the raised solar road stud is mounted on the marking line, the impact of the raised solar road stud is completely transferred to the marking line, making it easy to knock down the raised solar road stud and pasting the marker line.

NOKIN NK-RS-A6-1 solar road studs use aluminum from Japanese technology to put more pressure on solar road studs. Ip68 waterproof solar road stud have been tested for waterproofing, charging rate and hardness prior to sale. Japanese bulletproof material computer cover, safe and stable. Long-term warranty for solar road stud reflectors. NOKIN offer five colors, white, yellow, red, green and blue, and we can also customize for you.

Flashing Solar road stud provide sustainable solutions through innovative solar energy. Aluminium solar road studs can help reduce accidents at regional rail intersections, intersections and provide guidance and hazard warnings to drivers in the dark. NOKIN solar road stud use high-brightness Taiwan Epistar brand LED lights for 100,000 hours of working time. The visual distance is more than 600 meters.

NOKIN 30T load capacity IP68 aluminum solar road stud is one of the hot products. Solar systems with aluminum road stud help reduce environmental impact and save costs. NOKIN produces solar road stud with more than 20 years of production experience, with competitive solar aluminum road stud prices, for the global traffic road safety market and the global trusted partners to provide more choices.

NOKIN aluminum solar road stud NK-RS-A6-1 with high-brightness U.S. brand LED lights, working hours of 100,000 hours. Load bearing: > 30T (this aluminum solar road stud can be installed in the middle of the road).American brand solar panels. 23% high conversion rate. The charging speed is fast. Japanese brand cast aluminum materials. Solar road studs are under more pressure. The highest quality epoxy glue secures the solar road studs to ensure solar charging. Philips PC board, safe and stable. Long-term warranty for solar road stud reflectors.

Supported by highly qualified and experienced team members, NOKIN is committed to providing exclusive Solar Raised Pavement Marker. The Solar Raised Pavement Marker is made of aluminum and hard plastic for center segmentation and edges. The Solar Raised Pavement Marker provided are a suitable guide for night and inclement weather conditions. In addition, our valuable customers can get this Solar Raised Pavement Marker at an affordable price.

NOKIN’s high-quality aluminum Solar Road Spike can withstand a weight of 20 tons and can be used on most roads without fear of being crushed or damaged. Aluminum Solar Road Spike are designed with road safety in mind to help prevent serious accidents and emit rather than reflect light.

Supported by highly qualified and experienced team members, NOKIN is committed to providing exclusive Solar Dock Light. The Solar Dock Light is made of aluminum and hard plastic for center segmentation and edges. The Solar Dock Light provided are a suitable guide for night and inclement weather conditions. In addition, our valuable customers can get this Solar Dock Light at an affordable price.