solar cat eyes for bridge safety led

solar road stud – Active lighting not only minimizes the interference of rain and fog, but also protects the driver’s line of sight from the effects of automotive lighting. It provides ...
Share:
Content

solar road stud – Active lighting not only minimizes the interference of rain and fog, but also protects the driver’s line of sight from the effects of automotive lighting. It provides the driver with a safe driving direction with a visible distance of 500 meters.

 

 

Body material PC
Power supply Solar panel(Monocrystalline 2.5V /0.2W)
Battery NIMH 600MAH
Led φ5 Ultra bright LED*10(double side)
Working period Full recharging for 8hours and working in 120hours constantly
Working model Constant or blinking(flashing frequency 2Hz,also can be made according to your requirements)
Color Red,Yellow,Green,Blue,White
Water proof IP68
Resistance >20T
Size 117*117*23mm
Life time >3years;

 

 

 

 

 

?REFLECTED LIGHT – The brightness of the reflected light from the street light is very high. The brightness of the reflected light can reach 2000mcd, which is 6 times to 7 times of the ordinary peak light, and the bulb is larger than 6000cmd. You can choose the flash or keep the light mode.

?ROAD WARNING LIGHT – This road warning sign is designed for correct vehicle direction or intersection as a warning to remind pedestrians and vehicles to slow down and reduce traffic risks.

 

 

 

 

 

?RAINPROOF – Professional sealed enclosure to prevent rain from entering. Therefore, warning lights with a solid cast aluminum structure can handle most outdoor environments. The eye-catching red is ideal for illuminating streets, driveways, railways, etc.

?SOLAR – LED is used as a light source to save energy and protect the environment. The solar panels are charged in the sun, automatically charged during the day, automatically lit at night. When fully charged, the battery can work continuously for more than 72 hours.

 

 

 

Installation Steps:

1. Positioning: Firstly, use the ruler to determine the installation position, ensure that the longitudinal position of each position is on a straight line, the installation distance and design requirements shall prevail, and the installation site shall be flat, dry, clean and seamless.
2. Mixing glue: using dedicated A glue and B glue, A glue and B glue ratio is 1:1 (such as: 1 kg A glue, 1 kg B glue) glue must be evenly mixed, consistent color.
3. Applying glue: the road surface should be cleaned during installation, the glue should be moderate, not only stick to the ground, but also do not overflow too much, about 40 grams of glue per lihgt, apply glue to the bottom of the road sign. Clean up the road debris after installation.
4. Patrol: check the installed spike lights after two hours.
5. Road closure: It is recommended to close the road for 6 hours to ensure the curing time of the glue.

 

Inquiry
* Name:
* Email:
Country:
Tel/Whatsapp:
* Message:
More