solar raised pavement marker

As one of the most popular solar road studs in the Philippines, they are designed for road safety, help prevent serious accidents and emit light instead of reflecting it. It’s perfect as a solar road stud marker to illuminate your driveway, and can also be used on docks, decks, paths, driveways, gardens, walkways, walkways, yards or patios.

The solar road stud light in the picture is the most widely used and most common type of aluminum solar road stud. Its advantage is that it is cheap and widely used. The solar road stud light has its own reflectors. When the power is insufficient, the reflectors on both sides can still serve as a warning. The disadvantage is that the pressure resistance is not particularly good, and it can only be installed on both sides of the road, not in the center of the road.

NOKIN LED solar road studs have strong product warning effects, weather resistance, and pressure resistance, NOKIN led solar stud lights have high-pressure resistance. NOKIN can formulate different types of LED solar studs lights according to customer requirements, which are well used and have high utilization rate, and can be used in the middle of the road.

As a manufacturer of high-quality solar pavement markers, NOKIN has exported a large number of solar pavement markers to the Philippines. If you were a stable dealer in the Philippines and looking for business opportunities for solar road studs, Nokin hope you can become our Agent in the Philippines.

Solar road studs provide maximum visibility at night with high-quality LEDs. The solar road studs can be easily mounted to the ground with 2 screws and fixing plugs. The material type of the solar road stud is aluminum and the LED colors are available in yellow, blue, red, white, and green.

Shenzhen NOKIN Traffic Facilities Co.,Ltd. specializes in the research and development, production of solar road studs (solar powered road signs self-luminous protruding road signs), Shenzhen NOKIN traffic facilities Co.,Ltd. on the selection of materials, production requirements of strict control, to ensure that each solar road studs factory in line with national transportation industry standards.

Intelligent road stud lights induced traffic system is an embedded dynamic intelligent guidance device with intelligent guidance (also called guidance). The most outstanding feature is that the vehicle detection equipment is installed inside the blinking solar road stud light to sense the vehicle, so that it has a “smart brain” to issue the correct guidance instruction in time to ensure the safe driving of the driving personnel. Solar Road stud lights are traffic warning equipment for road outline and lane demarcation, applicable to highways, urban roads, rural roads, parks, scenic spots, bridges and other road surfaces.

Solar panel powered cat eyes function introduction.
1. Road lighting, yurt, tent, garden, courtyard, park and other outdoor lighting.
2. Sturdy and durable, economical and practical, high-tech environmental protection, Solar panel powered cat eyes energy saving and emission reduction.
3. Charging mode using solar charging

Solar Road Stud Light (Solar Road Stud), also known as solar cat eyes, solar pavement markers, LED road stud lights, etc., Solar Road Stud Ligh is the use of solar panels charged, stored in the battery, until the night and the rain and fog when the light is not enough to automatically light, very good to guide the vehicle to drive in the right direction, effective protection of traffic safety.

Solar panels directly absorb solar energy and convert light energy into electricity, which is the first link in the whole solar Cat Eye Pavement Marker working system, and its efficiency directly determines the quality of solar Cat Eye Pavement Marker. NOKIN uses a single-crystal silicon panel, which has a high photoelectric conversion rate of about 14% and maximizes the conversion of solar energy into electricity to ensure the energy supply when the solar Cat Eye Pavement Markers are working.

Solar road studs, also known as solar road markers, is a new type of road traffic facilities active light-emitting warning products, solar stud is solar panels for charging components, batteries or capacitors for energy storage components, using LED light-emitting or combined with reflective sheet light-emitting. Mainly set in the road edge stone, fast and slow lane separation on the road, generally used in combination with the marking.

NOKIN led road stud pavement marker beautiful appearance, can be used for road guidance, but also play a decorative purpose, streamlined design, led light-emitting frequency can be selected, flexible choice of use scenes. Light base using die-casting aluminum materials, the surface of led road stud pavement marker using plastic spraying process, light weight, waterproof, strong shock resistance, corrosion resistance. The use of thickened pc material, with particularly good impact strength, UV resistance, thermal stability, flame retardant. Solar-powered, a charge, can work continuously for more than 48h service life of up to 3 ~ 5 years.

NOKIN solar aluminum road stud principle: the use of solar panels to charge the battery, in the light of sufficient light, solar panels in the light, generate current, voltage, to charge the battery. The battery of solar aluminum road stud outputs electrical energy to the load.

Solar road studs use solar energy charging, automatically glow at night and in the rain and fog weather when the light is not enough, well guide the correct direction of the vehicle, effectively protect traffic safety. Solar LED road stud is easy to install, no need to lay lines and effective energy saving

The compressive performance requirements of solar cat eye road studs.
According to the requirements of the relevant technical standards of the Ministry of Transport, the compressive index of solar cat eye road studs must reach more than 10 tons.?Pressure resistance is the most basic condition for the normal work of solar cat eye road stud. NOKIN production of solar road studs face shell using high pressure PC ballistic material, to enhance its electronic components part of the ability to resist pressure; in the shell design some reinforcement to share the pressure on the electronic components part.