English 中文
Your Position : Home > Products > Solar road stud
Raised road stud NK-RS-B2
Raised road stud NK-RS-B2
Raised road stud NK-RS-B2

Solar road stud NK-RS-B2

Body material: Aluminum alloy shell
Load capacity <15T (exclusive for path indication / roadside / use in parking lots whit light Traffic. It cannot be installed in the middle of the road )
Size: L125mm*W107mm*H26mm
LED color :
Visual distance: >400m
Product introduction :
Solar Road Stud also know as cat eyes,can help to reduce accident at regional rail crossing, intersection and provideguidance and hazard warning to drivers in darkness and bad weathers. The solar system of solar powered road studs is conducive for reducing environmental impact and saving costs. With more than 15 years of factory experience, led road studs produced by our company owns competitive solar road studs price and offers more choice to global traffic road safety market and trustworthy partners all over the world.
Working Principle of Solar Road Stud Light:

During the day, solar panels absorb sunlight and convert solar energy into electrical energy, which is stored in energy storage devices (batteries or capacitors). At night, the electrical energy in the energy storage devices is automatically converted into light energy (controlled by photoelectric switches) and emitted by LEDs. Bright light outlines the road and induces the driver's sight. Solar road studs will starts automatically to flash when night falls or with the onset of inclement weather .The bright flashing LEDs are highly effective at getting the attention of drivers much earlier than conventional road studs.

Installation Method Of Raised Solar Road Stud:
  • Carefully mark distance between placement of solar road stud lights.To prevent an adverse effect on ground,use a proper tool such as Core Drill.Drill Φ35mm and depth will be 55mm.
  • Remove all debris from installation hole.
  • Pour epoxy into the holes per manufacturer's instruction.
  • Verity that the installation hole is straight.Verity that the installation hole is large enough to allow epoxy to surround the solar led road stud shaft.
  • Set the lighting surface of the solar road stud to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and solar marker shaft. Verify the bottom of the solar road marker is firmly installed on the installation surface allowing for zero “surface float” to occur.(space between installation surface and bottom of the solar marker).
  • After curing the LED solar road stud for 6-8 hours, remove the installation of the isolation facility. 

The recommended spacing between each solar road studs are as follows:

Highways and Expressways       
7 - 8 yards (5 - 6 meters)

Dangerous Entrances and Exits       
4 - 5 yards (2 - 3 meters)

Access or Exit ways for Hospitals, Parking Lots, etc.       
0.5 - 3 yards (0.5 - 2 meters)

The spacing between of each solar studs also according to your actual application requirements, the above values are for reference only.


NK-RS-B2 can be used in motorway(highway/expressway/skyway), Urban road, parking lot and other public places,following is some application examples from our clients for your reference:
     solar road stud in city road    solar road stud in airport    solar road stud in highway
Solar road stud NK-RS-B2
Solar Road Stud Characteristic:
- High brightness led light with 50000 hours of working time.
- High conversion rate. Fast charge rate.
- Casting Al material. Solar stud bears more pressure.
- Most quality Epoxy resin glue to fix the solar stud, making sure of solar power charge.
- Long time warranty for road stud reflectors.
- Exclusive for path indication / roadside / use in parking lots whit light Traffic. It cannot be installed in the middle of the road.
Solar Road Stud Specification :
Body material Aluminum alloy shell
Power supply 2.5V/0.1W
Battery Ni-Mh 3V, 300mAh
Water proof IP68
Visual distance >400m
Life span  
Load capacity <15T(exclusive for path indication / roadside / use in parking lots whit light Traffic. It cannot be installed in the middle of the road )
Size L125mm*W107mm*H26mm  (L4.92"*W4.21"*H0.98"+2.17")
Package: (2pcs/box; 60pcs/ctn; Weight: 28kgs; Carton size: 67.5*28*20cm (2pcs/box; 60pcs/ctn; Weight: 61.73bs; Carton size: 26.57"*11.02"*7.87")  
Flashing mode Blinking or constant
(charging at daytime and working automatically at night)
Life Span 2years;
Waterproof IP68

NOKIN Traffic has now exporting more than 50000 smart solar road studs around the world. Thanks to the installation of 500 solar road studs on South Africa highways, NK-RS-A6-1 has become a star product in South Africa. NOKIN Traffic is the solar road studs manufacturer in China, we have advanced production equipment, and international management philosophy,and now NOKIN Traffic has 5 product patents. All the products are CE ROHS FCC certified, and meet the standard of ASTM D4280&EN1463-1 of Europe and America countries. The quality of its products wins praise of customers home and abroad.
nokin traffic   nokin traffic   solar studs in production        
Send Your Inquiry
Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.
* Email:
* Inquiry: