English 中文
Your Position : Home > Intelligent transportation

Pedestrian Crossing Monitoring System

It also can be combined with traffic lights, indicating the state of road traffic, traffic lights to reduce the intersection of the dead, Using for sidewalks, warning drivers and pedestrians, to ensure the crosswalk traffic safety.
Case material: aluminium+PC anti-ballistic material+epoxy filling
Product power consumption: wired type≦1.5W
LED: 18pcs 0.5W LED, brightness: ≥ 30000mcd(wired type)
LED color :
Visual distance: 500m under street lights
Introduction
Specification
Application
Inquiry
Product introduction :
  1. Can install in roadside, sidewalk, middle of road.
  2. Dig a hole for 125mm on the road, glued with epoxy glue, the bus is connected to the control box interface (no bus wireless connection).
  3. When the control box hanging installation, must do the first level of anti-lightning measures, install the ground.
  4. Product cabling must comply with electrical safety regulations.
  5. Road rehabilitation must reach the same road pressure level.
Before the product is installed, try to avoid strong collision and scratching, resulting in product performance decline,If solar road studs storage for too long time (more than 90 days), it needs charge and test before installation. After finishing the installation, must test and then to normal traffic. Non-professional or without permission can not change the internal wiring of the control box
Pedestrian Crossing Monitoring System
Characteristic:
  1. Using for sidewalks, warning drivers and pedestrians, to ensure the crosswalk traffic safety
  2. Can be combined with traffic lights, indicating the state of road traffic, traffic lights to reduce the intersection of the dead
  3. Can be installed in sidewalk junctions, through the active button trigger the studs working
  4. Coordinating with thermal imaging detectors, geomagnetic sensor, installed in the crosswalk or accident-prone area, automatic work to increase road safety.
  5. Embedded design makes it 400KN compression, can be installed in the sidewalk zebra, road centerline.
  6. The studs can be wired, driven by commercial power, the brightness can reach to 20m.
  7. The controller es multi-level security protection, and the life of system can be more than 5 years.
Specification :
Product power consumption: wired type≦1.5W;
Working mode: connect with traffic signal, traffic lights synchronization; connecting traffic cameras to detect the passing pedestrians.
Color: red/yellow/green
LED: 18pcs 0.5W  LED, brightness: ≥ 30000mcd(wired type)
Visual Distance: 500m under street lights
Interface Mode: UART or TTL
Connect mode: wired
Lifetime: more than 3years
Working environment: temperature: -40℃ to +80℃, moisture: 10% to 90%。
Size: studs: φ135*50mm; controller: 300*200*100mm
Case material: aluminium+PC anti-ballistic material+epoxy filling
Waterproof grade: IP68(studs); IP65(controller)
Compression rating: greater than 400KN.
Control box electrical protection: not less than surge 40KA.
Send Your Inquiry
Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.
Name:
Country:
* Email:
Phone:
* Inquiry: